Cleaning the Dual Frother Plus | Jura Capresso Impressa F7 manual

Steaming and frothing directly in your cappuccino cup: With practice, you can steam and froth directly in your cappuccino cup. First steam and froth the milk, then add your espresso shot.

Please note: The less fat content the milk has the more froth will be created. Skim milk will produce the most froth and will let you taste more of the coffee. 1% and 2% milk will give you less froth. Regular whole milk (3% fat) will produce the least amount of froth. You can also use soy milk.

15. CLEANING THE DUAL FROTHER PLUS

Always keep the Dual Frother Plus clean and free of milk deposits. Clean immediately after use. Hardened milk particles will make it impossible to create milk froth.

Fast cleaning:

Display shows READY. Place a cup underneath the frother

(Fig. 13) and turn the Steam/Water Selector to the water symbol. Let hot water run through the frother for about 3 seconds and then stop. This will flush out any small milk droplets.

Thorough cleaning of the Dual Frother parts:

•Remove the Dual Frother (Fig.14) from the Steam Nozzle (Fig. 15c).

Please note: The Dual Frother is tightly connected to the Steam Nozzle. First loosen the Clip-On Connector part (Fig. 14c) by turning it a few times, then push down to remove.

•Unscrew the black tip (Fig.14a) from the Clip-On Connector (Fig. 14c). You can use a coin to loosen the black tip.

•Soak all three parts in hot soapy water.

•Make sure that the two side holes and the channel of the black tip (Fig. 14a) are free of any milk deposits.

Cleaning the Steam Nozzle (Fig. 15c)

•Place a cup underneath the Steam Nozzle (the Dual Frother is off) and let a bit of hot water run through the Steam Nozzle. Tip: If the steam nozzle is blocked by hardened milk, use a needle, toothpick or paper clip and loosen up the milk deposit. Then let some hot water pass through the Steam Nozzle.

Assembly of Frother Parts

•Make sure the Steam Nozzle is screwed onto the Metal Tube (Fig. 15a) finger tight.

•Assemble the Dual Frother and make sure that the tip is screwed onto the Connector finger tight (Fig 14a, c).

•Push the black Clip-on Connector (Fig.14c) firmly into the steam nozzle (the connector should sit flush with the chrome sleeve (Fig. 15b) so that the steam nozzle is no longer visible). Please note: If the parts are not connected tightly it will not be possible to create the frothy foam on top of the milk.

16. CLEARYL WATER FILTER CARTRIDGE

The machine comes with one Water Filter Cartridge. This cartridge is specially made for use with the F7.

The cartridge:

•Reduces the water hardness up to 75%.

•Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and up to 67% aluminum.

•Cleans the water through an upward current principle (Fig. 8) just before the brewing cycle starts, ensuring freshly filtered water every time you make coffee.

•Eliminates decalcifying. When using the water filter cartridge, you never need to decalcify your machine.

•To reorder cartridges see chapter 22 "Supplies".

15.

Impressa F7 specifications

The Jura Capresso Impressa F7 is a standout coffee machine that combines advanced technology with user-friendly features to create an exceptional coffee experience. This fully automatic espresso machine is designed for coffee enthusiasts who crave high-quality beverages at the touch of a button.

One of the main highlights of the Impressa F7 is its innovative one-touch brewing system. With just a single press, users can prepare a variety of drinks, from espresso to cappuccinos, and even lattes, effortlessly. The intuitive control panel is equipped with an easy-to-read graphic display that guides users through the brewing process, ensuring that every cup is brewed to perfection.

This model is powered by the well-regarded Aroma+ grinder, which utilizes a conical burr grinding mechanism to deliver consistently ground coffee beans. The grinder is adjustable, allowing users to customize their grind settings to match their unique preferences. This ensures that each extraction maximizes the coffee's flavors and aromas. Furthermore, the Impressa F7 can accommodate both whole beans and pre-ground coffee, providing flexibility for different brew preferences.

The F7 features Jura's innovative P.E.P. (Pulse Extraction Process) technology, which enhances the flavor and richness of the espresso. This system optimizes the extraction time for shorter espresso shots, resulting in a full-bodied and aromatic drink. The machine also includes a fine foam technology system, which enables users to create a perfectly textured milk foam for lattes and cappuccinos, enhancing the overall coffee experience.

In terms of design, the Impressa F7 boasts a sleek and modern aesthetic, with high-quality materials that ensure durability. The integrated water tank is easily accessible and has a capacity of approximately 64 ounces, providing users with ample water supply for multiple drinks. The machine's self-cleaning feature makes maintenance a breeze, allowing users to focus on enjoying their coffee rather than spending time on upkeep.

Overall, the Jura Capresso Impressa F7 stands out for its combination of top-tier technology, ease of use, and stylish design. Whether you're a seasoned barista or a casual coffee drinker, the Impressa F7 offers an unparalleled experience that caters to all coffee lovers, making it a worthy addition to any kitchen.