Jura Capresso Impressa F7 Fill Water, Tips for Better Coffee Height adjustable coffee-spout

Page 22

5.The displays still shows SOLVENT IN TANK / OPEN TAP. Turn the Steam/Water Selector to the water symbol. The machine will pump the mixture through the frother in intervals. During this procedure the display shows DECALC.ON. When this cycle is finished the display shows CLOSE TAP.

6.Turn the Steam/Water Selector back to the cup symbol. The display shows DECALC.ON. Now the machine pumps the mixture through the coffee spout into the drawer.

7.When this cycle is completed the display shows EMPTY TRAY. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows

FILL WATER.

8.Remove the water tank, rinse thoroughly, fill with cold fresh water and replace.

9.Place a large container (at least 20 oz.) underneath the frother. The display shows OPEN TAP.

10.Turn the Steam/Water Selector to the water symbol. The machine will pump hot water through the frother in intervals. During this procedure the display shows DECALC.ON. When this cycle is finished the display shows CLOSE TAP.

11.Turn the Steam/Water Selector back to the cup symbol. The display shows DECALC.ON. Now the machine pumps hot water through the coffee spout into the drawer.

12.When the cleaning cycle is completed the display shows EMPTY TRAY. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows HEATING and then PRESS RINSE.

13.Push the Rinse Button. The machine will run a regular rinse

cycle and the display will show READY.

14.Clean front of machine and grid with a moist, soft cloth. Attention: You can run a decalcifying cycle at anytime even if the machine does not prompt you.

• Turn the machine off. Push and hold the Rinse button until display shows EMPTY TRAY.

• Continue with step 2 above.

21.TIPS FOR BETTER COFFEE Height adjustable coffee-spout

Adjust the height of the coffee-spout to the size of your cups.

Grinding

Please refer to chapter 8 "Adjusting the Grinder."

Pre-warm cups

You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important it is to warm your cups.

Sugar and cream

Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee. You can preheat milk and cream with the frother.

22.SUPPLIES AND ACCESSORIES

The following supplies are necessary to keep your machine in good working order:

•Clearyl Water Filter Cartridge (model# 64533)

•Special Cleaning Tablets (model# 62205)

•Decalcifying Tablets (white, square) model# 61848

Please note: You must use decalcifying tablets if you do not use the Clearyl cartridge.

22.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Impressa F7 Important Safeguards Customer Service Jura-Capresso LLCPage Ready Dual Frother Plus Metal Tube Chrome Sleeve Steam Nozzle Table of Contents Product Registration 3c. Coffee Facts PLEASE, DON’T... or you void your warranty protection3b. Different Coffee Drinks PLEASE, doFactory Settings Preparing the Machine for the First TimeDaily Preparation Adjusting the GrinderAdding Coffee Beans ON/OFF Button Heating Rinse ReadyGrinding times approx. Mild ......... to 7 seconds Using PRE-GROUND CoffeeUsing HOT Water Select CUP ButtonHeating and Frothing Milk Ready Heating Steam Ready 60 SEC Close TAPCleaning the Dual Frother Plus Clearyl Water Filter CartridgeHEATING. Ready 16a. Installing & Activating the Clearyl Water CartridgeYou must activate the cartridge as follows Filter RinsingAdjusting the Water Hardness Programming18a. Aroma 18b. Temperature18c. Setting the Time and Unit on 18d. Auto SHUT-OFFCare and Maintenance 20b. Cleaning with Special Tablet 19e. General Cleaning InstructionsAutomatic Cleaning Cycles 20a. Rinsing 19d. Stones and Beans20c. Decalcifying Procedure Empty TraySupplies and Accessories Tips for Better Coffee Height adjustable coffee-spoutFill Water Troubleshooting All supplies are available throughDrawer DOESN’T Pull OUT or Display Shows Malfunction Limited WarrantyGrinder Makes AN Extremely Loud Noise no Beans are Ground Other limitations and exclusions

Impressa F7 specifications

The Jura Capresso Impressa F7 is a standout coffee machine that combines advanced technology with user-friendly features to create an exceptional coffee experience. This fully automatic espresso machine is designed for coffee enthusiasts who crave high-quality beverages at the touch of a button.

One of the main highlights of the Impressa F7 is its innovative one-touch brewing system. With just a single press, users can prepare a variety of drinks, from espresso to cappuccinos, and even lattes, effortlessly. The intuitive control panel is equipped with an easy-to-read graphic display that guides users through the brewing process, ensuring that every cup is brewed to perfection.

This model is powered by the well-regarded Aroma+ grinder, which utilizes a conical burr grinding mechanism to deliver consistently ground coffee beans. The grinder is adjustable, allowing users to customize their grind settings to match their unique preferences. This ensures that each extraction maximizes the coffee's flavors and aromas. Furthermore, the Impressa F7 can accommodate both whole beans and pre-ground coffee, providing flexibility for different brew preferences.

The F7 features Jura's innovative P.E.P. (Pulse Extraction Process) technology, which enhances the flavor and richness of the espresso. This system optimizes the extraction time for shorter espresso shots, resulting in a full-bodied and aromatic drink. The machine also includes a fine foam technology system, which enables users to create a perfectly textured milk foam for lattes and cappuccinos, enhancing the overall coffee experience.

In terms of design, the Impressa F7 boasts a sleek and modern aesthetic, with high-quality materials that ensure durability. The integrated water tank is easily accessible and has a capacity of approximately 64 ounces, providing users with ample water supply for multiple drinks. The machine's self-cleaning feature makes maintenance a breeze, allowing users to focus on enjoying their coffee rather than spending time on upkeep.

Overall, the Jura Capresso Impressa F7 stands out for its combination of top-tier technology, ease of use, and stylish design. Whether you're a seasoned barista or a casual coffee drinker, the Impressa F7 offers an unparalleled experience that caters to all coffee lovers, making it a worthy addition to any kitchen.
Top Page Image Contents