Jura Capresso Impressa F7 warranty Empty Tray, 20c. Decalcifying Procedure

Page 21

below within the next few days. Please use one white cleaning tablet (enclosed). The machine comes with a pack of 2 tablets. To re-order cleaning tablets see chapter 22.

Important: Once the cleaning program has started do not interrupt the procedure.

1.Make sure the machine is on and the water tank is full. 2.Push the Rinse button. The display shows EMPTY TRAY. 3.Remove and empty the drawer and used coffee container and

replace complete assembly (Fig. 21) TRAY MISSING.

Important: Even if the drawer and the used coffee container are empty, you still need to remove the drawer for approx. 20 seconds and then replace it. The display shows PRESS RINSE.

4.Place a 12 oz. container under the coffee spouts. 5.Push the Rinse button. The display shows CLEANING.

After a moment the display shows ADD TABLET.

6.Open the ground coffee lid and drop in one white cleaning tablet (Fig. 22)and close lid. PRESS RINSE. The F7 comes with two tablets. To order more tablets see chapter 22.

7.Push the Rinse button. The display shows CLEANING. The cleaning program will dispense hot foamy water in intervals through the coffee spouts.

8.When finished, the display shows EMPTY TRAY.

9.Lift and remove the drawer. Empty the used coffee container and drawer and replace. The display shows READY indicating the machine is now ready to brew coffee again.

Attention: You can run a tablet cleaning cycle at anytime even if the machine does not prompt you,

READY. Push and hold the Rinse button until display shows

EMPTY TRAY.

• Continue with step 3 above.

20c. DECALCIFYING PROCEDURE

The machine has an integrated decalcifying program. When the display shows DECALCIFY / READY it is time to decalcify the machine. You can still make coffee. However, it is highly recom- mended that you decalcify the machine within the next 3 to 4 days. Please note: If you use the Clearyl water cartridge and the display shows DECALCIFY / READY, then your cartridge function is not activated. Follow the instructions in chapter 16a to program the Clearyl Cartridge function.

Important: The decalcifying program must not be interrupted.

DECALCIFYING AGENT: Only use our special decalcifying tablets. For supplies see chapter 22.

CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine.

1.Push the Rinse button. The display shows EMPTY TRAY.

2.Remove and empty the drawer and used coffee container and replace complete assembly (Fig. 21).

Important: Even if the drawer and the used coffee container are empty, you still need to remove the tray for approx. 20 seconds and then replace it. The display shows SOLVENT IN TANK / OPEN TAP.

3.Make sure the water tank is empty. Completely dissolve three of the white square tablets in 16 oz. of water and pour this mixture into the water tank.

4.Replace water tank. Place a large container (at least 20 oz.) underneath the frother.

21.

Image 21
Contents Impressa F7 Important Safeguards Jura-Capresso LLC Customer ServicePage Ready Dual Frother Plus Metal Tube Chrome Sleeve Steam Nozzle Table of Contents Product Registration 3b. Different Coffee Drinks PLEASE, DON’T... or you void your warranty protection3c. Coffee Facts PLEASE, doPreparing the Machine for the First Time Factory SettingsAdding Coffee Beans Adjusting the GrinderDaily Preparation ON/OFF Button Heating Rinse ReadyUsing HOT Water Using PRE-GROUND CoffeeGrinding times approx. Mild ......... to 7 seconds Select CUP ButtonReady Heating Steam Ready 60 SEC Close TAP Heating and Frothing MilkClearyl Water Filter Cartridge Cleaning the Dual Frother PlusYou must activate the cartridge as follows 16a. Installing & Activating the Clearyl Water CartridgeHEATING. Ready Filter RinsingProgramming Adjusting the Water Hardness18c. Setting the Time and Unit on 18b. Temperature18a. Aroma 18d. Auto SHUT-OFFCare and Maintenance Automatic Cleaning Cycles 20a. Rinsing 19e. General Cleaning Instructions20b. Cleaning with Special Tablet 19d. Stones and BeansEmpty Tray 20c. Decalcifying ProcedureTips for Better Coffee Height adjustable coffee-spout Supplies and AccessoriesFill Water All supplies are available through TroubleshootingGrinder Makes AN Extremely Loud Noise no Beans are Ground Limited WarrantyDrawer DOESN’T Pull OUT or Display Shows Malfunction Other limitations and exclusions

Impressa F7 specifications

The Jura Capresso Impressa F7 is a standout coffee machine that combines advanced technology with user-friendly features to create an exceptional coffee experience. This fully automatic espresso machine is designed for coffee enthusiasts who crave high-quality beverages at the touch of a button.

One of the main highlights of the Impressa F7 is its innovative one-touch brewing system. With just a single press, users can prepare a variety of drinks, from espresso to cappuccinos, and even lattes, effortlessly. The intuitive control panel is equipped with an easy-to-read graphic display that guides users through the brewing process, ensuring that every cup is brewed to perfection.

This model is powered by the well-regarded Aroma+ grinder, which utilizes a conical burr grinding mechanism to deliver consistently ground coffee beans. The grinder is adjustable, allowing users to customize their grind settings to match their unique preferences. This ensures that each extraction maximizes the coffee's flavors and aromas. Furthermore, the Impressa F7 can accommodate both whole beans and pre-ground coffee, providing flexibility for different brew preferences.

The F7 features Jura's innovative P.E.P. (Pulse Extraction Process) technology, which enhances the flavor and richness of the espresso. This system optimizes the extraction time for shorter espresso shots, resulting in a full-bodied and aromatic drink. The machine also includes a fine foam technology system, which enables users to create a perfectly textured milk foam for lattes and cappuccinos, enhancing the overall coffee experience.

In terms of design, the Impressa F7 boasts a sleek and modern aesthetic, with high-quality materials that ensure durability. The integrated water tank is easily accessible and has a capacity of approximately 64 ounces, providing users with ample water supply for multiple drinks. The machine's self-cleaning feature makes maintenance a breeze, allowing users to focus on enjoying their coffee rather than spending time on upkeep.

Overall, the Jura Capresso Impressa F7 stands out for its combination of top-tier technology, ease of use, and stylish design. Whether you're a seasoned barista or a casual coffee drinker, the Impressa F7 offers an unparalleled experience that caters to all coffee lovers, making it a worthy addition to any kitchen.