Adjustable automatic switch-off | Jura Capresso E65, E60, E45, E40

Pull the plug and the feed wire out of the wire box on the back of the machine.

Put the plug in.

Do not switch the machine on.

Press the draw-off key for about 3 seconds. Now, the ,

, , symbols light up.

Now select the corresponding level with the draw-off key

and press the ON/OFF switch in order to save the setting. The symbols go off.

The water hardness only need to be set before the first use of the machine or if a different water quality is used.

If you do not carry out a change of level for longer than 30 seconds, the display goes off. The last figure you have stored remains valid.

3.7 Adjustable automatic switch-off

You can amend the automatic switch-off time of 1 1/2 hours set by Jura. The machine offers you three levels for this:

1st level

The symbol lights up. The automatic switch-off is not acti- vated.

2nd level

The , , symbols light up.

The automatic switch-off is set to 1 1/2 hours.

3rd level

The , , , , , symbols light up. The automatic switch-off is set to 3 1/2 hours.

In order to set or alter the automatic switch-off time, please proceed as follows:

Connect the plug with the mains.

However, do not switch the machine on.

Please the draw-off key for about 3 seconds. The , ,

symbols light up.

Select the required level with the draw-off key.

Press the ON/OFF switch in order to save the required level.

If you do not carry out a change of level for longer than 30 seconds, the display goes off. The last figure you have stored remains valid.

Switch your machine on with the ON/OFF		switch.	E
The	symbol lights up.		E
Place	an empty cup under the pivoting nozzle for hot water/
steam	(13).
Switch the selector switch for hot water/steam (12) to the
position. The machine now lets off water and the			symbol
flashes at the same time.
If the	symbol lights up on the display,	turn the	selector
switch for hot water/steam (12) back to the		position.