Jura Capresso 13637 manual ‘Fill bean container’ is, ‘Empty drip tray’ is, ‘Fill water tank’ is

Page 49

 

 

Troubleshooting

Troubleshooting

 

 

 

 

 

Problem

Cause/Result

Action

When preparing a latte

–

T Turn the setting wheel of the cappuc-

macchiato, the typical

 

cino frother to the far right and the Milk

three layers do not

 

Foam position ü.

form.

 

T Change the length of the interval to at

 

 

least seconds in programming mode

 

 

(see Chapter ‘Permanent settings in

 

 

programming mode – Product settings’).

Insufficient foam is

The cappuccino frother is

produced when the

dirty.

milk is frothed or milk

 

sprays from the

 

cappuccino frother.

 

T Rinse and clean the cappuccino frother (see Chapter ‘Maintenance – Rinsing the cappuccino frother’).

T Check that the air intake pipe is fitted on the cappuccino frother.

T Rinse or replace the air intake pipe. You will find a replacement in the Welcome Pack.

Coffee only comes out

Coffee or ground coffee has

T Put the grinder on a coarser setting or

in drips when it is

been ground too finely and

use coarser ground coffee (see Chapter

being prepared.

is blocking the system. The

‘Preparing and using for the first time –

 

same filter cartridge may

Adjusting the grinder’).

 

have been used several

T Perform descaling (see Chapter

 

times or the water hardness

‘Maintenance – Descaling the machine’).

 

set incorrectly in the

 

 

programming mode.

 

 

 

 

Water hardness cannot

The CLEARYL Pro Blue filter

T Deactivate the filter cartridge in

be adjusted.

cartridge is activated.

programming mode.

 

 

 

‘Fill bean container’ is

The sliding catch for the

T Pull the sliding catch on the right-hand

displayed although the

bean container has not

side of the bean container fully out.

bean container is full.

been pulled out or has not

 

 

been pulled out completely.

 

 

 

 

‘Empty drip tray’ is

The metal contacts of the

T Clean and dry the metal contacts on

always displayed.

drip tray are dirty or wet.

the back of the drip tray.

 

 

 

‘Fill water tank’ is

The water tank float is

T Descale the water tank (see Chapter

displayed although the

trapped.

‘Maintenance – Descaling the water

water tank is full.

 

tank’).

 

 

 

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Jura Type Impressa XJ Professional Instructions for UsePermanent settings in programming mode Control elements Preparing and using for the first timeYour Impressa XJ Professional PreparationMaintenance Symbol descriptionOr death Or serious injuryImportant Safeguards Or tripped over Never do Important Safeguards Drip tray Cup platform Control elementsTop of the machine Front On/Off button Display Rotary Switch Settings by the Jura Preparing and using for the first timeService technician Setting up the machineFilling the water tank First-time use ‘Welcome to JURA’ Activating the filterDisplay shows the products you can prepare ‘Saved’ appears briefly on the display. ‘Water hardness’ ‘Please press the Rotary Switch.’Determining the water Adjusting the grinderHardness Recommend using a milk cooler Connecting milkHand side of the cappuccino frother ‘ ’ buttons PreparationBeverage Ways of preparing aEspresso and coffee Latte macchiato, cappuccino Preparing two specialty coffeesPress the ‘Latte macchiato’ button Foam Warm milk and milkGround coffee Press the ‘Espresso’ button Permanently setting the amount of water for the cup sizeVidual preference. This setting is not saved ‘Hot water’ and the temperature are displayedHot water Place a cup under the hot-water nozzleDaily operation Switching on Daily maintenanceSpecialty coffee or milk are rinsed Switching offPermanent settings in programming mode Enabling and disabling Programming modeProduct settings Settings Enable or disable one-offProduct selector view Press the ‘One-off settings’ button‘Please select product’ Press the ‘product selector’ button. ‘product selector’Products Maintenance settingsSetting the water With milk, or hot water, the machine must heat up Energy-saving modePress the ‘Save energy’ button. ‘Save energy’ You can set the automatic switch-off to minutes, minutes Automatic switch-offPress the ‘Switch off after’ button. ‘Switch off after’ Lowing the last action on the machineRestore factory settings Background color LanguagePress the ‘Product counter’ button Querying informationRinsing the machine ‘Rinse the coffee system’ MaintenanceRinsing the cappuccino Rinsing the machineFrother Press the ‘Rinse the coffee system’ button‘Maintenance status /’ Carefully pull the cappuccino frother down and off Dismantling and rinsing Cappuccino frotherRunning water Reassemble the cappuccino frotherChanging the filter Press the ‘Change the filter’ button. ‘Change the filter’ Cleaning the machineOperation is interrupted, ‘Add cleaning tablet’ Press the Rotary Switch Descaling program lasts approximately minutes Container Cleaning the beanRemove the water tank Display messages ‘Empty drip tray’ is ‘Fill bean container’ is‘Fill water tank’ is Other ‘ERROR’ System Transport and environmentally friendly disposalDisposal ‘Save energy’ / ‘Active’ Technical data‘Save energy’ / ‘Inactive’ Button On/Off button Button programming IndexContact details Cover Contact details Internet Language Latte macchiato Machine Switch-offIndex Contacts Jura / Mentions légales
Related manuals
Manual 52 pages 50.67 Kb

13637 specifications

The Jura Capresso 13637 is a prominent choice among coffee aficionados, blending sophisticated technology with user-friendly features to deliver an exceptional brewing experience. Known for its elegant design and robust performance, this automatic coffee machine stands out in the crowded market of espresso makers.

One of the standout features of the Jura Capresso 13637 is its integrated conical burr grinder, which ensures consistently ground coffee for optimal flavor extraction. The machine boasts multiple grind settings, allowing users to customize the coarseness of their coffee beans according to personal preference. This feature not only preserves the aromatic profiles of the beans but also enhances the overall quality of the brew.

The Jura Capresso 13637 is equipped with a Dual Frothing System, offering barista-quality milk frothing at home. This technology provides the capability to create velvety microfoam, perfect for crafting lattes, cappuccinos, and other milk-based beverages. The machine's steam wand is user-friendly and adjustable, enhancing the versatility and creativity of the user.

Another notable characteristic is the One-Touch feature, which enables the preparation of a range of specialty drinks at the touch of a button. From espresso to lungo and everything in between, this machine simplifies the coffee-making process without sacrificing quality. The intuitive control panel, complete with an LCD display, allows for easy navigation, making it accessible for both beginners and seasoned coffee lovers.

The Jura Capresso 13637 also emphasizes convenience with its removable water tank and drip tray, ensuring effortless cleaning and maintenance. The water tank holds a generous capacity, reducing the frequency of refills and allowing users to brew multiple cups without interruption. Additionally, the integrated descaling program helps maintain the machine's longevity and efficiency.

With energy efficiency in mind, this model features an automatic shut-off function, which helps reduce power consumption when the machine is not in use. This makes the Jura Capresso 13637 not only a practical choice for coffee enthusiasts but also an eco-friendly option for the environmentally conscious.

In conclusion, the Jura Capresso 13637 combines advanced technology with practical features, delivering a versatile and high-quality coffee brewing experience. Whether you are enjoying a simple shot of espresso or indulging in a frothy cappuccino, this machine stands ready to cater to your coffee desires with precision and style.
Top Page Image Contents