When you have reached the required quantity of hot water, turn the steam/hot water rotary knob (15) back to the position 
.
SELECT PRODUCT
At the start of a water
10. Switching machine off
When the machine is switched off, the rinsing programme is auto- matically started. Therefore, place an empty container under the 
switch.
When the rinsing water has run into the cup, the machine switches off. Throw the rinsing water away.
11. Programming
Before leaving our factory, the machine is adjusted so that you can draw off coffee without additional programming. In order to adapt the result to your taste, various settings can be programmed indi- vidually. You will find the programming keys under the display.
The following settings can be programmed:
Filter
Water hardness
Aroma
Automatic
Language selection
Exit
11.1 Programming Filter
Please read chapter 12.8 “Insert filter”.
11.2 Programming water hardness
Please read chapter 3.6 “Adjusting water hardness”
11.3 Programming Aroma
AROMA INTENSIVE
Press the key P, an acoustic signal is heard.
By pressing keys | and you can select the required setting |
(INTENSIVE or MILD) and then confirm it with key P. | |
By pressing key | you can select the next level. |
11.4 Programming automatic switch-off time
OFF AFTER 5.0 HRS. |
| |
Press the key P, an acoustic signal is heard. |
| |
5.0 flashes. | E | |
By briefly pressing keys and you can set the hours and then | ||
| confirm them with key P. (0.5 – 9 hrs.) | |
By pressing key you can select the next level.
11.5 Cup counter
10 SUPPLIED (total of
To obtain the information, press the required
By pressing key you can select the next level.
11.6 Programming language
Press the key P.
By briefly pressing the keys and you can select the required language and then confirm it with key P.
Press the keys | or | until the following report appears: |
11