The symbols on the display mean:
HARDNESS
LEVEL — Water hardness function switched off
HARDNESS | German water hardness 1 – 7° |
LEVEL 1 | French water hardness 1.79 – 12.53° |
HARDNESS | German water hardness 8 – 15° |
LEVEL 2 | French water hardness 14.32 – 26.85° |
HARDNESS | German water hardness 16 – 23° |
LEVEL 3 | French water hardness 28.64 – 41.14° |
HARDNESS | German water hardness 24 – 30° |
LEVEL 4 | French water hardness 42.96 – 53.7° |
The machine is adjusted to HARDNESS LEVEL 3 in the factory. You can alter this setting by proceeding as follows:
Pull the plug and the feed wire out of the wire box on the back of the machine.
Put the plug in.
Switch the machine on by pressing the ON/OFF 
key.
The machine goes into the starting position fully automatically.
PLEASE WAIT
Press the key P until you hear an acoustic signal.
FILTER NO
Press the key a number of times in succession until the fol- lowing report appears:
HARDNESS LEVEL 3
If you press key P, you hear an acoustic signal and the hardness level you have set flashes.
If you press the keys | and | you can now set the required |
hardness level. |
|
|
When you have selected the corrected hardness level, press the key P once more as a confirmation. You can hear an acoustic signal.
Press the keys | and | until the following report appears: |
EXIT
Press the key P to return to
4. First start of operation
4.1 Fill system with water
Switch your machine on with the ON/OFF 
switch.
The machine goes into the starting position fully automatically.
Place an empty cup under the pivoting nozzle (14).
PLEASE WAIT
OPEN TAP
SYSTEM FILLING / PLEASE WAIT
The flow of water stops automatically.
CLOSE TAP
5. Rinsing the machine
RINSE UNIT
Place an empty cup under the
Press the rinsing key 
.
If the machine has been switched off and has already cooled down, the rinsing function will be demanded when the machine is switched on.
A rinsing is automatically started when the machine has been switched on.
8