ADD TABLET (Fig. 9) / PRESS RINSE
UNIT CLEANING / PLEASE WAIT
An acoustic signal can be heard.
EMPTY TRAY
Wait for about 10 seconds before you put the drip tray back in again.
PRESS RINSE
UNIT CLEANING / PLEASE WAIT
An acoustic signal can be heard.
EMPTY TRAY
SELECT PRODUCT
After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned.
14. Descaling
The machine has an integrated
If the machine needs descaling, the report appears on the dis- play.
You can continue to draw off coffee and hot water/steam and then run the descaling programme later.
Only run the descaling programme when the machine has been switched off for at least 2 hours and has cooled down well. The descaling programme is started with the machine switched off. Once it has started, the descaling programme must not be interrupted.
Only use Jura cleaning tablets. They are available from your Jura dealer.
Switch your machine off with the ON / OFF switch 
and leave it to cool down for 2 hours.
Remove the water tank.
Press the rinsing key for about 3 seconds.
EMPTY TRAY
AGENT IN TANK
Completely dissolve the contents of one blister (2 tablets) in
0.5litres of water in a vessel and pour the mixture into the water tank. Put the tank back in again.
AGENT TANK / OPEN TAP / PRESS RINSE
Place a sufficiently large vessel under the pivoting nozzle (14).
Turn the selector switch for coffee or hot water / steam (13) to position 
and press the rinsing key 
.
UNIT DECALCING / PLEASE WAIT | E | |
An acoustic signal is heard. | ||
EMPTY TRAY |
| |
CLOSE TAP |
| |
UNIT DECALCING / PLEASE WAIT |
| |
The descaling solution is guided into the drip tray in the interior |
| |
| of the machine. |
|
An acoustic signal is heard. |
| |
EMPTY TRAY |
| |
An acoustic signal is heard. |
| |
FILL WATER |
| |
Rinse the water tank out well and fill it with cold fresh tap water. Then put it back into the machine again.
Place a sufficiently large vessel under the pivoting nozzle.
15