Jura Capresso X7-S Programming language, Fill beans, Installation of an automatic filling device

15.11 Programming language

■Press the key PROG.

■By pressing the keys + or - you can select the required language.

■To store, press the key PROG.

■Press the key + in order to reach the next phase or the key EXIT to quit the programming.

16.7 Fill beans

■	: FILL COFFEE BEANS
■ Fill with beans as described in Chapter 3.4.		E
	The display FILL COFFEE BEANS goes off after a draw-off of

coffee.

We recommend that you clean the bean container out with a dry cloth from time to time before filling. For this, switch the machine off.

16.Care and maintenance 16.1 Fill water

■ : FILL WATER TANK

■When this display lights up, no more drawing-off is possible. Fill with water as described under Section 3.3.

The water tank should be rinsed out every day and filled with fresh water.

If you use an automatic filling device, we recommend that you rinse the water tank out regularly and fill it up with fresh water.

16.2 Installation of an automatic filling device

Please read the operating instructions of the automatic filling device.

16.3 Empty grounds container

The grounds container collects the coffee grounds.

■ : EMPTY DRAWER

■When this display lights up, no more draw-offs are possible and the grounds container must be emptied.

■Carefully remove the drip tray – there is water in it. Then remove the grounds container (Fig. 4).

16.4 Empty drip tray

■ : EMPTY DRIP TRAY

■When this display lights up, no more draw-offs are possible and the drip tray must be emptied.

■Carefully remove the drip tray – there is water in it (Fig. 4).

16.5 Grounds container missing

■ : DRAWER MISSING

■When this display lights up, the grounds container has not been in- serted properly or is missing.

16.6 Drip tray missing

■ : DRIP TRAY MISSING

■When this display lights up, the drip tray has not been inserted properly.

16.8 Removing foreign objects

■Switch your machine off with the ON/OFF operating switch.

■Remove the plug from the power socket.

■Open the hinged door on the reverse of the machine (Fig. 5).

■Press the slides downwards (Fig. 6) and remove the bean con- tainer.

■Remove any beans with a vacuum cleaner.

■Position the spanner (Fig. 7).

■Turn the spanner in an anti-clockwise direction until the foreign object becomes loose.

■Remove remaining powder with a vacuum cleaner.

■Now replace the bean container and pull the slides to the front before closing the door (Fig. 6).

16.9 Clean machine

■ : CLEANING NECESSARY

After 220 draw-offs or 180 rinsings, the machine has to be cleaned. You can continue to draw off coffee and hot water/steam. We recom- mend that you clean the machine (Chapter 19) within the next few days.

Carry out a cleaning (Chapter 19).

16.10 Machine scaled

■ : DECALCIFYING NECESSARY

The machine recognises the necessity of de-scaling. You can continue to draw off coffee or hot water/steam. We recommend that you carry out the de-scaling (Chapter 20) within the next few days.

16.11 Clean contacts

■ : EMPTY DRIP TRAY / CLEAN CONTACTS

The de-scaling residue in the area of the contacts must be removed. Please proceed as follows:

■Rinse the contact fasteners in trough (B) (Fig. 8) as well as the con- tacts (A) with hot water and washing-up liquid. Then additionally clean the contact fasteners in trough (B) with a brush.

16.12 General cleaning instructions

■Never use abrasive articles or corrosive chemicals to clean your machine.

■Wipe off the inside and outside of the casing with a soft, damp cloth.

■Clean the pivoting nozzle after every use.

11