Operation (Continued)
! | WARNING | ! |
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
! | WARNING | ! |
DO NOT operate mower without entire grass catcher, side chute or recycling plug in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.
Installing the Grass Catcher
1.Follow the WARNING statement found on this page.
2.Lift the discharge door (A, Figure 8) located at the rear of the machine.
3.Install the grass catcher (B) onto the rear of the machine. Position the rod ends (C) of the catcher frame over the tabs (D) located at the rear of deck. Release the discharge door, which is spring loaded, onto the top of the grass catcher.
A |
Operation | D |
| |
| C |
! | WARNING | ! |
Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deterioration and wear during normal usage. Check condition of bag before each use. Immediately replace worn or damaged catcher bags with only bags recommended by SNAPPER. The grass catcher is optional equipment on some models.
B |
Figure 8: Installing the Grass Catcher
10 | www.snapper.com |
