Decal Identification (Continued)
(3) Engine Speed Control:
Indicates direction to increase engine RPM (rabbit), decrease engine RPM (turtle).
(5) Operator Presence Control (OPC):
Arrow points to the OPC bail. When bail is rotated rearward, the engine may be started and will run as indicated by the engine with rotating arrow. With the engine running, the blade is rotating as indicated by the cut grass symbol. When the bail is released and rotates forward, the engine will stop.
Operator Safety
(4) Speed Selector:
Indicates ground speed selection: ‘3’ (Rabbit) indicates top speed; ‘2’, medium speed; ‘1’ (Turtle), slowest speed.
(6) Clutch:
Located on the plastic grip of the traction control lever. Moving the lever toward the handle engages the traction clutch and forward motion starts. When the lever is released, the clutch disengages and forward motion stops.
(7) Height Control Instruction:
Shows direction of movement of Height Adjust Handle to select a change in height of cut from highest cutting height (clockwise) to the lowest (counterclockwise). Note that there is a total of eleven heights of cut.
5
