Jura Capresso X7-S Coffee Drawing off coffee / espresso, Drawing-off milk froth, Programming

Page 9

10. Coffee

10.1 Drawing off coffee / espresso

: SELECT PRODUCT

Place 1 or 2 cups, as necessary, under the coffee spout (4) and press the required selection switch. The pre-brew system (I.P.B.A.S©) moisturises the coffee powder, briefly interrupts the discharge and then starts the actual brewing procedure.

You can interrupt the draw-off prematurely by pressing any of the coffee draw-off buttons. In order to obtain outstanding froth, you can adapt the coffee spout (4) individually to match the size of your cups.

13. Drawing-off milk froth

: SELECT PRODUCT

Pour milk/Tetra Pak into a jug and immerse the Cappuccino tube

into the milk.

E

 

Place 1 cup under the coffee spout (4) and press the draw-off

 

key .

 

The programme amount is prepared and stops automatically.

 

You can interrupt the draw-off prematurely at any time by pressing the draw-off key again.

10 min. after the draw-off of milk, a rinsing is automatically started. The rinsing is announced in advance by an acoustic signal.

10.2 Drawing off cappuccino

: SELECT PRODUCT

Put milk/Tetra Pak into a jug and immerse the cappuccino tube into the milk.

Place 1 cup under the coffee spout and press the draw-off key . The machine firstly prepares the milk froth, then the coffee (Fig. 3).

You can interrupt the milk froth and the coffee prematurely by pressing the draw-off key once more.

10 min. after the draw-off of Cappuccino, a rinsing is auto- matically started. The rinsing is announced in advance by an acoustic signal.

10.3 Drawing off pots of coffee

: SELECT PRODUCT

Place 1 pot under the coffee spout (4) and press the draw-off key (pot of coffee). Your pot of coffee is brewed in a number of cycles. The number of cycles is shown in the display.

You can interrupt the draw-off prematurely at any time by pressing the draw-off key again.

11. Drawing off hot water

: SELECT PRODUCT

Place a cup under the pivoting nozzle (18) and press the draw-off key .

: PORTION HOT WATER

The draw-off of the programme portion of hot water stops auto- matically.

You can interrupt the draw-off prematurely at any time by pressing the draw-off key again.

When water is drawn off, there can be splattering at the beginning. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

12. Drawing off steam

: SELECT PRODUCT

Place a cup with the liquid to be heated under the pivoting nozzle (18) and press the draw-off key .

: STEAM ACTIVE

To end the draw-off of steam, press the key .

When steam is drawn off, there can be splattering at the beginning. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

14. Switching the machine off

Switch the machine off with the ON/OFF operating switch. A rinsing is automatically started when the machine is switched off.

15. Programming

The following phases can be programmed:

Grinding amount

Temperature

Amount of water

Amount of milk

Portion of hot water

Water hardness

Clock

Machine on

Machine off

Draw-offs

Language

15.1 Programming grinding amount

Switch your machine on the with ON/OFF operating switch.

Press the key PROG. until an acoustic signal is heard.

: ADJUST COFFEE QUANTITY / SELECT PRODUCT

Press the required draw-off key.

: (selected product)

..............II.............. +

By pressing the key + or - you can determine the amount to be ground.

To store, press the key PROG.

: (selected product)

￿: 100% ￿: 0%

You can determine the allocation of the grinder “left” or “right”.

By pressing the key + or - you can change the values.

To store, press the key PROG.

: ADJUST COFFEE QUANTITY / SELECT PRODUCT

Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming.

9

Image 9
Contents Impressa X7-S Page III IV Abcij Dfgkl Page Table of contents Switching the machine on Safety precautionsImportant information for the user Preparing the machine Checking the mains voltageInstalling the Claris plus filter cartridge Setting the grinderAdjusting the grinder Adjustment of water hardnessCoffee Drawing off coffee / espresso Switching the machine offDrawing-off milk froth Drawing off cappuccinoProgramming amount of water Programming TemperatureProgramming amount of milk Programming portion of hot waterClean machine Installation of an automatic filling deviceClean contacts General cleaning instructionsCappuccino cleaning Disassembling and cleaning the dual spoutCombined cleaning Coffee cleaningAdjustments by the Jura service technician DisposalTips for perfect coffee Messages ProblemsDecalcifying NecessaryLegal information Technical specificationsArt 4/07

X7-S specifications

The Jura Capresso X7-S is a remarkable super-automatic espresso machine that's designed to bring the café experience into the comfort of your home. With its sleek design and robust build quality, this machine not only looks good on your countertop but also delivers exceptional performance and versatility.

One of the main features of the X7-S is its integrated coffee grinder. The professional-grade conical burr grinder ensures consistent grind size, allowing for optimal extraction and rich flavor in every cup. With an adjustable grind setting, users can customize the coarseness to suit their preference, from fine espresso to coarser coffee. This feature ensures that whether you’re in the mood for a classic espresso, a rich cappuccino, or a light Americano, the X7-S can cater to your needs.

Another highlight of the Jura Capresso X7-S is its one-touch brewing system. This innovative technology allows users to prepare their favorite coffee beverages at the touch of a button. The intuitive control panel features clearly labeled options for different types of coffee, making it easy to create a variety of beverages with minimal effort. The machine can prepare a plethora of drinks, from espresso and cappuccino to lattes, all at the touch of a single button.

The X7-S also incorporates Jura's Pulse Extraction Process (P.E.P.), a state-of-the-art brewing method that optimizes the extraction time, ensuring full flavor and aroma in every shot of espresso. The P.E.P. technology delivers short pulses of water through the coffee grounds, enhancing the extraction process and resulting in a well-balanced, flavorful cup.

Additionally, the Jura Capresso X7-S features a high-performance milk frother that allows users to create perfectly frothed milk for cappuccinos and lattes. With options for both steaming and frothing, the machine gives users the flexibility to craft café-quality beverages with ease.

Moreover, the machine boasts a self-cleaning function, which simplifies maintenance and ensures that the X7-S remains in top condition without extensive effort from the user. The water reservoir is large enough to accommodate multiple brews, reducing the frequency of refilling.

In conclusion, the Jura Capresso X7-S stands out as a high-quality super-automatic espresso machine that combines advanced technology with user-friendly features. Its blend of style, performance, and versatility makes it an excellent choice for coffee enthusiasts looking to enjoy café-style beverages at home. Whether you are a seasoned barista or a casual coffee drinker, the X7-S is designed to enhance your coffee experience to new heights.