SRS Labs SR560 manual Rear Panel Operating Summary, AC Power Input, Amplifier Power Output

Page 14

OPERATION AND CONTROLS

Figure 3: SR560 Rear Panel

REAR PANEL OPERATING SUMMARY

The SR560 rear panel is pictured in Figure

3.Various interface and power connectors are provided, along with fuses and charger status LEDs.

ground is connected to the AC line ground conductor.

AC Power Input

The power entry module contains the receptacle for the AC line cord and fuse. The line fuse should be a 1 A slow-blow for 100/120 VAC operation, or a 1/2 A slow- blow for 220/240 VAC operation.

Amplifier Power Output

The -12 V, +12 V, and AMP GROUND banana jacks provide external DC power up to 200 mA for use as a bias source referenced to the amplifier's floating power supplies.

The CHASSIS GROUND banana jack is provided to allow the amplifier's ground to be referenced to the chassis. If the unit is connected to an AC power source via a three prong grounding plug, the chassis

Battery Charger

The two 3 A slow-blow fuses protect the battery supply and charging circuitry. If these fuses are blown, battery power will be unavailable, and charging of the batteries will not be possible.

When both the positive and negative supply batteries are dead, the red "CHARGE" LED will be on brightly, and the batteries will be charging at a fast rate. When the batteries approach a fully charged condition, the charging current will be reduced to complete the charge and maintain the batteries. Because the batteries charge at different rates, the indicators on the rear panel can reflect the charge status of the positive and negative batteries independently. When one set of batteries switches to the "MAINTAIN" mode, the red "CHARGE" LED will be reduced to half brightness, and the yellow "MAINTAIN" LED will turn on at half brightness. When both batteries switch to "MAINTAIN", the red "CHARGE" LED will

10

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model SR560 Page Table of Contents Appendix a PCB SR560 Revision F 9/89 SchematicsCalibration and Repair Appendix BIntroduction and Setup Instrument OverviewPreparation for USE Use in Biomedical Applications Accessories FurnishedRepackaging for Shipment Environmental ConditionsPage Specifications SR560 LOW-NOISE Preamplifier Specifications ChartSpecifications Front Panel Operating Summary PowerOperation and Controls SourceFilters Gain Gain ModeReset OutputBattery Charger AC Power InputAmplifier Power Output Rear Panel Operating SummaryBlanking Input Battery Care and UsageBattery Care RS-232 InterfaceAvoid Deep Discharge Differential LOW-NOISE Front END Configurable Filters and GainCircuit Description Output StagesMicroprocessor Battery Charger and PRE-REGULATORSOverload Detection Power Regulators Rear Panel InterfacesBatteries and P.E.M Front PanelCalibration and Repair Offset AdjustmentFront END Replacement CalibrationFuse Replacement SR560 Offset Adjustment ProcedureBattery Replacement Noise Contours Input Voltage Noise Dynamic ReserveMaximum Calibration and Repair Remote Programming CommandsAppendix a IntroductionAppendix a Intrinsic Noise Sources Appendix BNoise Sources and Cures Non-Essential Noise SourcesCapacitive Coupling Inductive CouplingThermocouple Effect Resistive Coupling or ‘Ground Loops’Microphonics Appendix B SR560 Component Parts List Front Panel Parts ListMain Board Parts List 22U MIN 01U Axial 804 00225-548 Insl MTP5N05 SR560 Component Parts List SR560 Component Parts List PIN Mach SR566 Assy Adhes Tape Miscellaneous Parts List SR560 Component Parts List

SR560 specifications

SRS Labs SR560 is a cutting-edge audio enhancement technology that has gained recognition for its ability to deliver an immersive sound experience. Built upon years of research, the SR560 utilizes proprietary algorithms to achieve high-fidelity sound output while maintaining an incredibly dynamic range.

One of the most notable features of the SR560 is its adaptive audio processing, which adjusts sound dynamics based on the content being played. This means that whether one is listening to music, watching a movie, or playing video games, the sound quality is optimized in real-time to provide the best listening experience. The SR560 excels at enhancing dialogue clarity in films, ensuring that important audio elements are never lost amidst background sounds.

Another key characteristic of the SR560 is its support for multi-channel audio. With the rise of surround sound systems, the SR560 is designed to integrate seamlessly with 5.1 and 7.1 speaker setups. This ensures that users can enjoy a true surround sound experience, where each audio channel is processed independently to create a lifelike auditory environment. The SR560’s processing capabilities allow it to convert standard stereo audio into multi-channel output, enriching the listening experience for any audio format.

SRS Labs has equipped the SR560 with advanced bass optimization technology. This feature enhances low-frequency sound, providing deep, rich bass without distortion. Whether it’s the thumping beats of music or the rumble of action-packed movies, the SR560 ensures that users can experience the full spectrum of audio without compromising on quality.

Furthermore, the SR560 showcases state-of-the-art sound management features that provide users with customizable audio profiles. This allows users to tailor their audio experience according to personal preferences, whether they prefer a more balanced sound, enhanced bass, or boosted treble frequencies. The intuitive interface ensures that adjustments can be made effortlessly.

In conclusion, the SRS Labs SR560 stands out as a versatile audio enhancement technology that caters to the needs of various audio consumers. By combining adaptive processing, multi-channel support, bass optimization, and customizable profiles, the SR560 ensures a rich and immersive audio experience. As the demand for high-quality sound continues to rise, the SR560 is poised to remain a significant player in the evolution of audio technology.
Top Page Image Contents