C a u t i o n

W A R N I N G

Troubleshooting

Replacing the Battery

8.Using your fingers (or a nonmetallic tool), carefully lift up the battery clip slightly, then slide the battery out of its holder.

Figure 4-1. Removing Battery

Replace the battery only with the same type.

9.Carefully insert the new battery—positive (+) side up—into the battery holder.

10.Reassemble the the router module with the SNMP module, then rein- stall them in the hub, as described in steps 6 – 12 on pages 1-13 – 1-15.

Dispose of the used battery properly. Do not attempt to recharge, crush, or disassemble it; do not incinerate it or expose it to heat above 100°C (212°F).

4-16