Specifications
Data Communications Specifications and Certifications
The WAN port (with the appropriate cable) meets the following specifications:
RS-232 and CCITT V.24/V.28, synchronous
EIA RS-422/449 and CCITT V.36
CCITT X.21
CCITT V.35
ISO 2593 and MIL-C-28747
The HP J2628A AdvanceStack Router 210 Module is approved under Approval Number NS/G/1234/J/100003 for indirect connection to public telecommunication systems within the United Kingdom.
Hewlett-Packard has applied for certification for use on X.25 packet- switching networks. Certifications were still in progress at the time of printing. Please contact your local HP representative for latest certification status.
Third-Party Products
Hewlett-Packard designed the HP Router 210 Module to operate with industry-standard hardware and software products.
HP has conducted limited testing with certain non-HP products to determine compatibility with the HP routers described in this guide. Please contact your HP-authorized LAN dealer or HP representative for the current list of tested products.
HP relies in part upon information from the suppliers of non-HP products and makes no warranty, expressed or implied, with respect to the operation of these products or their compliance with worldwide regulatory requirements. HP advises customers to conduct independent examination to determine suitable levels of compatibility for the customer’s individual needs.
For information about the hardware and software/firmware warranties applicable to the HP Router 210 Module, refer to the warranty card shipped with the router module.
