Operation

Resetting and Clearing

N o t e

If, within about 20 seconds after you released the Clear button, the Self-

 

test LED has not turned off (and the Router Fault LED is not on), you

 

waited too long after releasing the Reset button before releasing the

 

Clear button. (If a console is connected, the prompt MON()> appears.)

 

To clear the router, repeat steps 1 – 3, and be sure to release the Clear

 

button within five seconds after releasing the Reset button.

 

After the self-test is complete, the router module reboots using the

 

factory default configuration, and looks for a SmartBoot configuration

 

on the network. If a SmartBoot configuration has been set up on the

 

WAN or LAN for the router module (and the required WAN or LAN link

 

is connected), the router module reboots using the SmartBoot

 

configuration.

Operation 3

3-9