Installation
Using the Main Menu and NCL
Several of the procedures in this chapter require using NCL (Network Control Language Interpreter) commands.
To use NCL commands:
1.At the Main Menu screen, press [2 ].
The NCL prompt appears. This prompt matches the current system name. For example, if the system name is DEFAULT_CONFIG, the NCL prompt appears as shown below:
NCL prompt
Figure
2.Type the NCL command, then press [Enter].
3.To exit from NCL and return to the Main Menu screen, enter the NCL Exit command:
exit [Enter]
For more information about using NCL, refer to the User’s Guide.