Installation

1.Make sure all the packing materials are re- moved from the inside of the door.

2.Inspect the oven after unpacking for any vi-

sual damage such as: Misaligned Door Damaged Door

Damaged Door Seal

Dents or Holes in Door Window and Screen

Dents in Cavity

If any of the above are visible, DO NOT use the oven

3.This Microwave Oven weighs 12.5 kg and must be placed on a horizontal surface strong

enough to support this weight.

4.The oven must be placed away from high temperature and steam.

5.DO NOT place anything on top of the oven.

6.Keep the oven at least 8 cm away from both sidewalls and 10 cm away from rear wall to ensure the correct ventilation.

7.DO NOT remove the turn - table drive shaft.

8.As with any appliance, close supervision is necessary when used by children.

WARNING - THIS APPLIANCE MUST BE EARTHED.

1.The power cord is 1.4 m long, the plug socket should be within easy reach of this cord.

2.This oven requires 0.9 KVA for its input.

consultation with service engineer is suggested	CAUTION: This oven is protected internally
when installing the oven.	by a 250V, 6 Amp Fuse.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

Green - and - yellow : Earth

Blue	: Neutral
Brown	: Live

As the colours of the wires in the mains leads of the appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green - and - yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol-coloured green or green - and - yellow

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.