Powermate P024-0101SP Troubleshootingg Guideguide, Air Motor Lubrication, To Clean

Page 5
Figure 4

OPERAOPERATINGTING INSTRUCTIONSINSTRUCTIONS (continued)(continued)

b.Insert the desired collet chuck into the tool and tighten, using the collet wrenches.

6.Connect the tool to the air hose quick coupler. NOTE: It is recommended that a whip hose with a swivel (P012-0079SP - not included) be used to prevent twisting, kinking and excessive wear to the air hose (ref. item “F” in figure 1 for recommended connections).

7.Squeeze the trigger gently. When starting with a cold grinding stone or accessory, apply it to the work slowly until the stone or accessory gradually warms up. Make smooth contact with the work, and avoid any bumping action or excessive pressure. When the trigger is fully depressed, the tool is at full speed. As the trigger is released, the tool slows down, allowing the operator to choose the best speed and power for the job. Release the trigger to stop the tool.

USERUSER--MAINTENANCEMAINTENANCE INSTRUCTIONSINSTRUCTIONS

Air Motor Lubrication

To maintain the maximum performance of the air tool, it must be lubricated each time it is used. Dust, dirt, rust and oil residue will build up inside the tool and reduce the performance. An in-line oiler is recommended for proper automatic tool lubrication (see Figure 1). If an in-line oiler is not available, the tool can be lubricated manually through the inlet port (see Figure 4).

1.Disconnect the air tool from the air supply.

2.Turn the tool upside down and while depressing the trigger, add 4-6 drops of Coleman Powermate® air tool oil #018-0059SP or SAE10 nondetergent oil into the air inlet. NOTE: Depressing the trigger helps circulate oil in the air motor.

3. Reconnect the tool to the air supply, cover the exhaust port end with a towel and run approximately 30 seconds to remove excess oil.

NOTE: If the tool remains sluggish after it has been lubricated, the internal components may need to be cleaned.

To Clean:

Disconnect the air tool from the air supply and pour or spray a generous amount of WD-40® into the air inlet with the trigger depressed. Connect the tool to the air supply, cover the exhaust port end with a towel and run for approximately 30 seconds. Follow the air motor lubrication instructions above after cleaning is completed to re- lubricate the tool.

After oiling or cleaning, cover the exhaust port with a towel and operate the tool for a few seconds to safely remove the excess oil. Clean the handle and surface of the tool of any oil residue. Failure to cover the exhaust port and clean the tool, can result in serious injury. Note: Keep the towel away from moving parts!

TROUBLESHOOTINGG GUIDEGUIDE

SYMPTOM

POSSIBLE CAUSE(S)

CORRECTIVE ACTION

Tool will not run or runs

Grit in tool; tool gummed up

Clean the air motor inside the tool with WD-40®

slowly

 

(see “user maintenance” section).

 

No oil in tool

Add 4-6 drops of air tool oil into the air inlet of the

 

 

tool (see “user maintenance” section).

 

Low air pressure

Adjust compressor regulator to 90 PSI.

 

Air hose leaks

Tighten and seal hose fittings with Teflon® tape if

 

 

leaks are found.

 

 

 

Excessive vibration

Damaged grinding stone or

Replace with a new stone or accessory.

 

accessory

 

5 - ENG

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Especificaciones DE LA Herramienta Ttoolool SpecificaspecificationstionsCaractéristiques DE Loutil General Safety Safetysafety Guidelinesguidelines -- DefinitionsdefinitionsWork Area Safety Personal SafetyAIR Source Safety Tool USE and Care SafetyTool Service Safety Operaoperatingting Instructionsinstructions Typicaltypical InstinstallaallationtionTo begin using the tool To Clean Troubleshootingg GuideguideSymptom Possible Causes Corrective Action Air Motor LubricationPowermate Corporation Airport Road Box Kearney, NE Fax Limitedlimited WwarrantyarrantySécurité Personnelle Sécurité GénéraleSécurité DE Laire DE Travail Sécurité DE LA Source Dalimentation EN AIR Sécurité Relative À Lutilisation ET À Lentretien DE LoutilSécurité Lors DE Lentretien DUN Outil Modemode Demploidemploi Instinstallaallationtion TypetypeAvant dutiliser loutil Pour changer le mandrin à pinceGuide DE Dépannagennage Entretienentretien Pparar LutilisalutilisateurteurLubrification du moteur pneumatique Dappuyer sur la détenteGarantiegarantie Limitéelimitée Seguridad EN EL Lugar DE Trabajo Seguridad GeneralSeguridad Personal Asegúrese de que la toalla no esté cerca de partes moviblesSeguridad DEL Suministro DE Aire Seguridad DE USO Y Cuidado DE LA HerramientaSeguridad DEL Servicio DE LA Herramienta Instruccionesinstrucciones Dede Operaciónoperación Instinstalaciónalación TípicatípicaPara comenzar a utilizar la herramienta Para cambiar piedras afiladoras o accesoriosLubricación del motor de aire Guía DE Solución DE ProblemasproblemasMotor de aire Síntomas Posibles Causas Medida CorrectivaGarantíagarantía Limitlimitadaada

P024-0101SP specifications

The Powermate P024-0101SP is a robust portable generator designed for versatility and reliability, making it an ideal choice for both home use and outdoor activities. With a powerful engine and a range of features, this generator provides a dependable source of electricity in various situations.

At the heart of the Powermate P024-0101SP is its reliable engine, which offers a significant output of power. The generator can produce up to 2,400 running watts and 3,200 starting watts, ensuring enough energy to operate essential appliances like refrigerators, lights, and power tools. This substantial capacity makes it suitable for emergency backup during power outages or for use at job sites where electricity might not be readily available.

One of the notable features of the Powermate P024-0101SP is its lightweight and compact design. Weighing just over 50 pounds, it is easy to transport, with built-in handles that enhance portability. This is especially beneficial for those who require a generator for camping trips, tailgating, or other outdoor adventures, as it can easily fit into vehicles without taking up excessive space.

The generator is equipped with a durable steel frame, providing ruggedness and stability, which is essential for outdoor use. Its integrated fuel tank has a capacity of 1.5 gallons, allowing for extended run times of up to 10 hours at half load. This means users can rely on the generator for prolonged periods without the need for frequent refueling.

In terms of technology, the Powermate P024-0101SP features a low oil shutdown mechanism that automatically turns off the engine when oil levels are too low. This vital safety feature prevents engine damage and extends the overall lifespan of the generator. The unit also has multiple outlets, including household GFCI outlets and a 12V DC outlet, providing versatility in the types of devices that can be powered.

Furthermore, the generator operates at a relatively low noise level, which is a significant advantage in residential areas or places where noise regulations apply. This consideration for noise makes it a great choice for those who need to use a generator without disturbing neighbors.

Overall, the Powermate P024-0101SP combines power, portability, and safety features, making it a smart investment for anyone in need of reliable backup power or outdoor electrical solutions. Whether for emergency preparedness or recreational use, it delivers performance that users can depend on.
Top Page Image Contents