Nu-Vu PMA -5/12, PMA 5/18 owner manual Installation

Page 9

PMA–5/12 AND PMA–5/18 OWNER'S MANUAL

RECEIPT AND INSTALLATION

INSTALLATION:

A.Check to determine that the power source is the same voltage and phase as that indicated on the label on the side of the unit.

B.Position the unit where it is to be operated and adjust the unit so that it stands level and solid. Remove the glass Light Globes from the rear wall of the Oven and install the included 40-watt Appliance Bulbs. Replace the glass Light Globes and close the Oven Door securely.

IMPORTANT: DO NOT CONNECT THIS UNIT IF YOUR POWER SOURCE

DOES NOT MATCH THE UNIT REQUIREMENTS!!!

C.Carefully set all Controls and Switches to the OFF position.

D.The installing technician or electrician should remove the Outside Top of the unit (this panel is only pressed onto the top of the unit and should lift off easily). Connect the unit to the available power supply either through an attached cord and receptacle or through direct wiring by following these steps:

1.Take note of the labeling on the Power Terminal Block (Line 1, Line 2, Line 3).

2.Carefully identify the power source leads and attach them to the appropriate terminal connections.

3.Properly ground the unit BEFORE USE by attaching a grounding wire to the Ground Lug or Clamp provided next to the Power Terminal Block.

4.Allow enough slack in the wiring to allow for equipment to be moved about during installation and any future servicing.

E.Check the voltage at the terminals on the Power Terminal Block with a voltmeter and compare the

values with the label listings on the side of the Oven. If the values match the unit is ready for its INITIAL START-UP. If the readings DO NOT coincide you must call the NU-VU®Service Department.

F.Carefully position the Outside Top on the unit but do not press it into place. Position the unit in its final operating location and refer to the INITIAL START-UP PROCEDURE.

IMPORTANT: FAULTY INSTALLATION, IMPROPER USE, OR ANY OTHER FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SEVERE EQUIPMENT DAMAGE OR PERSONAL INJURY, AND MAY ALSO VOID ALL OR PART OF YOUR NU-VU®EQUIPMENT WARRANTY!!!

NU–VU® FOOD SERVICE SYSTEMS

MENOMINEE, MICHIGAN 49858

(906) 863-4401

SALES FAX (906) 863-5889 • SERVICE FAX (906) 863-6322

page 7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PMA-5/12 PMA-5/18 NU ·VU Food Service SystemsPMA-5/12 & PMA-5/18 About Your NU-VUOVEN NU-VUAIR OVENS, Proofers and WarmersNU-VUMODELS PMA-5/12 and PMA-5/18 Availability and Testing ConstructionShipment NU-VUEQUIPMENT Warranty PartsLabor Test time Total time Warranty LimitationsParts Return Procedure and Conditions Receipt Receipt and InstallationInstallation Initial START-UP Procedure Operating Instructions Timer Instructions Maintenance Maintenance and Cleaning GuideOven Interior CleaningTemperature CONTROL, How to Adjust Service and Replacement GuideDoor LATCH, How to Adjust Maintenance and Cleaning Guide PMA-5/12 and PMA-5/18 Replacement Parts ListInterior Components NU-VU Food Service Systems MENOMINEE, Michigan NU-VU Food Service Systems MENOMINEE, Michigan

PMA -5/12, PMA 5/18 specifications

Nu-Vu PMA 5/18 and PMA 5/12 are advanced models of portable modular air handling systems designed to offer superior climate control solutions for diverse environments. These units are particularly well-suited for various applications, such as industrial, commercial, and institutional settings, where air quality and energy efficiency are paramount.

One of the key features of the Nu-Vu PMA series is their compact design combined with powerful performance. The PMA 5/18 and PMA 5/12 models are engineered to efficiently manage larger volumes of air while maintaining an excellent balance between space-saving convenience and robust functionality. Their modular design allows for easy integration into existing systems or new installations, making them highly adaptable to different setups.

In terms of technology, both models utilize cutting-edge heat recovery systems that enhance energy efficiency and reduce operational costs. By recovering waste heat from exhaust air, these units can precondition incoming fresh air, leading to significant energy savings and improved HVAC performance. This feature also contributes to maintaining optimal indoor air quality by effectively regulating temperature and humidity levels.

Another notable characteristic of the PMA series is their advanced filtration systems. Equipped with high-efficiency particulate air (HEPA) filters, they ensure that even the tiniest airborne particles are captured, making them ideal for environments that require strict air quality standards. This is critical in applications ranging from laboratories to healthcare facilities, where airborne contaminants can pose serious health risks.

Ease of maintenance is also a consideration in the design of the Nu-Vu PMA 5/18 and PMA 5/12 models. Their user-friendly layout allows for quick access to key components, reducing downtime during servicing. This ensures that the units can operate seamlessly for extended periods, making them reliable assets in maintaining a controlled environment.

The PMA models are also equipped with sophisticated control systems that allow for precise monitoring and adjustments of air flow and environmental conditions. This level of control not only enhances comfort but also facilitates compliance with industry regulations and standards.

In summary, the Nu-Vu PMA 5/18 and PMA 5/12 air handling systems represent the pinnacle of portable climate control technology. With their energy-efficient design, advanced filtration systems, and user-friendly features, they stand out as versatile solutions for various air quality and climate management challenges in today's diverse settings.
Top Page Image Contents