85 | PROGRAMMING THE MACHINE |
|
86 | RECOMMENDATIONS |
|
"1 SMALL COFFEE | " | Code entering |
|
"TOTAL | " | To enter the code, press keys | and move |
"HOT WATER | " | the asterisk to the counter to be changed; select | |
it through the ENT button. |
| ||
"TOTAL | " | The following message will be displayed: | |
"COUNTER | " | "CODE?? | " |
"LOCKING | " | Enter the number to be set on the first character by | |
|
| ||
dispensed from the last reset.
From the VENDING menu, move the asterisk to
the COFFEE menu by means of keys 
; confirm the selection through ENT.
By means of the same keys 
, it is possible
to modify the selected value (to reset the counter, for example). Press ENT to save a new value. On the contrary, by pressingESC the new value entering is stopped and, as a result, the former
Counter
"COUNTER "
"LOCKING: XX"
After a certain number of cycles, this function allows to stop the coffee dispensing (excluding hot water, steam and cappuccino dispensing operations). It can also be used, for example, to program the machine servicing.
"COUNTER "
"CYCLES "
Code programming
A code protects the access to the machine counters; enter it for each programming section and before carrying out any modification. As soon as the code is entered, modifications can be carried out without entering it again as long as the programming function is enabled.
The machine is not supplied with a code. Keep to the following indications for code programming:
By means of keys 
move the asterisk to
item “VENDING” and select it through theENT key. The following message will be displayed:
"CODE"
means of keys 
and confirm the selection with
ENT. The entered number is then saved and the cursormovesautomaticallytothefollowingcharacter. If a wrong code has been entered, the following message will be displayed for about two se- conds:
"CODE FAULTY | " |
After having entered three wrong codes, the entering procedure is not allowed any longer.
Counter modification
Large coffee counter
"1 LARGE COFFEE "
"TOTAL: XX"
counter setting shall be considered.
Small coffee counter
"1 SMALL COFFEE "
"TOTAL: XX"
The counter shows the small coffee amount dispensed from the last reset.
From the VENDING menu, move the asterisk to the SMALL COFFEE menu by means of
keys 
; confirm the selection throughENT.
By means of the same keys 
, it is possible
to modify the selected value (to reset the counter, for example). Press ENT to save a new value. On the contrary, by pressingESC the new value entering is stopped and, as a result, the former counter setting shall be considered.
If the 0 value is set, the function is disabled. From the VENDING menu, move the asterisk to the COUNTER menu by means of
keys 
and confirm the selection through
ENT.
Press the same keys to modify the selected value (for example to set a new servicing limit). Through ENT a new value can be saved. On the contrary, by pressingESC the new value entering is stopped and, as a result, the former counter setting shall be considered.
When the set limit has been reached, the coffee dispensing stops and the following two messages are displayed:
"COFFEE DISPENS. "
"BLOCKED "
"****"
By means of keys enter the number to be set on the first character and confirm the selection through the ENT key. The entered number is saved and the cursor moves automatically to the following character.
After having entered the complete new code, it is necessary to save it.
The following message will be displayed:
The counter shows the large coffee amount dispensed from the last reset.
From the VENDINGmenu, move the asterisk to the
LARGE COFFEEmenu by means of keys
; confirm the selection with buttonENT.
By means of the same keys 
it is possible
to modify the selected value (to reset the counter, for example). Use theENT button to save a new value. Press theESC button to stop the new value entering procedure and, as a result, the former counter setting shall be considered.
Hot water dispensing counter |
|
"HOT WATER | " |
"TOTAL: | XX" |
The counter shows the hot water amount (in ml) dispensed from the last reset.
From the VENDING menu, move the asterisk to the HOT WATER menu by means of
keys 
; confirm the selection throughENT.
By means of the same keys 
, it is possible
"SELECT PRODUCT | " |
"READY FOR USE | " |
Reset the counters by pressing the cappuccino selection key 
.
Dosage of ground coffee
33
The coffee dosage adjustment lever (18) allows the selection of the grinding coffee amount from 6 to 9 grams. Place lever (18) on the required position.
| "NEW CODE=XXXX | " | Coffee counter |
| |
| "SAVE NO | " |
| ||
|
|
| |||
By means of keys | the code can be saved | "1 COFFEE | " | ||
"TOTAL: | XX" | ||||
|
|
| |||
or not saved: YES or NO.
The counter shows the regular coffee amount
to modify the selected value (to reset the counter, for example). Press ENT to save a new value. On the contrary, by pressingESC the new value entering is stopped and, as a result, the former counter setting shall be considered.
RECOMMENDATIONS
Prolonged idleness
If the machine hasn’t been used for a prolonged