Yellow
Yellow
ENGLISH 41
Remove the Classic Milk Frother from the steam/hot water wand.
Remove the “INTENZA+” water filter from the water tank if it was in- stalled and replace it with the small white original one. Place the water tank back into the machine.
Press the “” button until the following display is shown.
Press the “ ” button to start the descaling process.
Note:
If you press the “” button by mistake, press the “” button to quit.
Remove the water tank and pour in the entire contents of the descal- ing solution. Then top up the tank with fresh water up to the calc clean level.
Place the water tank back into the machine.
Empty the drip tray and the coffee grounds drawer then place them back in position.
Place a large container (1.5 l) under both the steam/hot water wand and the dispensing spout.