Acoustic Research AW-D510 owner manual Troubleshooting, Issue Cause and solution

Page 10

Troubleshooting

The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com.

Issue:

Cause and solution:

No sound

• Make sure the transmitter’s AC power adapter is fully inserted into the wall

 

outlet and the power cord from the AC adapter is firmly connected to the

 

transmitter power input jack.

 

• Check that the audio source component (DVD player, TV, etc.) is turned on and

 

transmitting sound as it normally should. If you’re using a PC or DVD player,

 

make sure you’ve selected the correct audio output and that the sound is not

 

muted.

 

• Confirm that the headphones are turned on (the LED is blue) and tuned to the

 

transmitter. If the LED is not blue, press the ch select key on the transmitter to

 

try a different channel. If this doesn’t work, press and hold the mute/link key on

 

the headphone and the ch select/link key on the transmitter simultaneously for 3

 

seconds.

 

• Make sure the headphones are charged—the LED on the right headphone should

 

be blue.

 

• Check that the headphone volume is turned up.

 

• If you’re using a variable output audio source (like a headphone jack or variable

 

output on a TV set), make sure the source component’s volume is set high

 

enough for the transmitter to detect.

 

• If you are using a Tape 2 Monitor output from your receiver/amp as the audio

 

output, check that you have pressed the Tape Monitor/Tape 2 button on the

 

front of the receiver. This will turn on the Tape 2 outputs, which may not have

 

been active.

Interrupted

• Move closer to the transmitter with the headphones on. Sending the signal

sound

through certain materials, such as glass, tile, and metal, can decrease the effective

 

transmitting distance of the system.

 

• Try a different channel from the transmitter: press the ch select key on the

 

transmitter’s top panel.

LED fails to

• Make sure the headphones are charged and that the transmitter is properly

light up

connected to the audio source. Then, move the headphones close to the

 

transmitter and press the headphone power button again.

Headphones

• Move closer to the transmitter.

shut off

• The headphones’ rechargeable battery needs to be recharged. Use the charging

automatically

cable on the transmitter to recharge the headphones.

 

Headphones

• If you’re trying to find a different channel on the transmitter, the headphones

start beeping

beep when they lock onto a new channel.

 

• The headphones beep every few seconds when the batteries are running low. Use

 

the charging cable on the transmitter to recharge the headphones.



Page 9 Page 11
Image 10
Page 9 Page 11
Contents Wireless HD Headphones Important Information Product InformationFeatures Table of ContentsIntroduction Getting Started Supplied AccessoriesCharging the Headset Connecting to a digital optical or digital coaxial output Connection to the Audio SourceConnecting to mini jack or stereo RCA outputs Headphone Buttons & IndicatorsLeft headphone side view Right headphone side view Transmitter back panel Transmitter Jacks & ControlsTransmitter top panel Using your Headphones Turning the Headphones OffAbout Variable-Level Audio Outputs If you’re using the Line in inputBattery life Listen safelyTroubleshooting Issue Cause and solutionHD Headphones SpecificationsMonth Limited Warranty Transmitter

AW-D510 specifications

The Acoustic Research AW-D510 is a powerful and versatile outdoor wireless speaker that seamlessly integrates advanced technology with timeless design. Designed to bring high-quality audio to outdoor spaces, it caters to a wide range of listening preferences and environments.

One of the standout features of the AW-D510 is its robust wireless connectivity. Utilizing Bluetooth technology, the speaker allows users to effortlessly stream music from smartphones, tablets, and other devices without the hassle of wires. The Bluetooth range can reach up to 100 feet, ensuring you can enjoy your tunes from a distance, whether you’re lounging by the pool or hosting a backyard gathering.

In addition to Bluetooth connectivity, the AW-D510 boasts a built-in FM radio along with an auxiliary input for connecting non-Bluetooth devices. This flexibility makes it easy to switch between different sources of audio depending on the occasion or preference.

Sound quality is where the AW-D510 truly shines. Equipped with dual 5.25-inch woofers and 1-inch tweeters, the speaker delivers a richly balanced sound profile with deep bass and clear highs. The speaker is designed to fill outdoor spaces effectively, making sure everyone can enjoy the music regardless of where they are seated.

Durability is another key characteristic of the AW-D510. It is constructed with weather-resistant materials, allowing it to withstand various environmental conditions, from rain to intense sunlight. This rugged design means it can be used not only in the backyard but also on camping trips, beach outings, or any outdoor adventure.

Portability is enhanced by the speaker’s lightweight design and integrated carrying handle, making it easy to transport from one location to another. Additionally, the long-lasting battery life ensures that the fun doesn’t stop prematurely; you can enjoy hours of uninterrupted playback on a single charge.

The AW-D510 is a perfect blend of modern technology, impressive audio performance, and rugged durability, making it an ideal solution for music enthusiasts who love to take their tunes outdoors. Whether you’re having a picnic, throwing a party, or simply enjoying a quiet evening under the stars, the Acoustic Research AW-D510 is designed to elevate your outdoor listening experience. With its combination of features, it sets a new standard for portable outdoor audio.
Top Page Image Contents