Quadra-Fire 7068-112 owner manual Models, Hot glass will cause burns

Page 1

R

CASTILE & SANTA FE PELLET STOVE Owner’s Manual

Installation and Operation

Models:

CASTILE-CE-MBK

SANTAFE-CE-MBK

CAUTION

DO NOT DISCARD THIS MANUAL

• Important operating and

Read, understand and

Leave this manual with

maintenance instruc-

follow these instruc-

party responsible for use

tions included.

tions for safe installa-

and operation.

 

tion and operation.

 

DO DISCARDNOT

WARNING

Please read this entire manual before installation and use of this pellet fuel-burning room heater. Failure to follow these instructions could result in property damage, bodily injury or even death.

Do not store or use gasoline or other flam- mable vapors and liquids in the vicinity of this or any other appliance.

Do not overfire - If any external part starts to glow, you are overfiring. Reduce feed rate. Overfiring will void your warranty.

Comply with all minimum clearances to com- bustibles as specified. Failure to comply may cause house fire.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

Do not touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in same room as fireplace.

Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other flammable materials away.

CAUTION

Fuel Type: Wood Pellets, less than 38mm in length, 6mm to 8mm in diameter.

Burning of any other type of fuel voids your warranty.

CAUTION

Check building codes prior to installation.

All local regulations, including those referring to national and European standards need to be complied with when installing the appliance.

Consult local fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

www.quadrafire.com

August 19, 2011

 

7068-112

Image 1
Contents Hot glass will cause burns ModelsSanta FE CE Pellet Stove Castile & Santa Fe CE Pellet StoveTable of Contents Castile & Santa Fe CE Pellet Stove Castile & Santa Fe CE Pellet Stove Listing and Code Approvals Glass SpecificationsAppliance Certification Electrical RatingOperating Instructions User’s GuideCombustible/Non-Combustible Materials Castile & Santa Fe CE Pellet Stove Fire SafetyFuel Material and Fuel Storage Filling the Hopper with Fuel Before Your First FireStarting Your First Fire Thermostat Calls For HeatFeed Rate Adjustment Instructions Fire CharacteristicsIginition Cycles Clear SpaceMaintaining & Servicing Your Appliance Quick Reference Maintenance ChartTypes of Fuel Frequency Daily Weekly Monthly YearlyCleaning Ash Pan/Drawer Cleaning Firepot with Cleaning Rod & Firepot Clean-Out ToolCleaning Beneath Heat Exchanger Ash Removal from FireboxCleaning the Exhaust Path Cleaning Heat Exchanger Chambers & Drop TubeCleaning the Hopper Door Latch InspectionPreparing Firebox for Non-Burn Season Task Contact your local dealer Cleaning the Top Vent AdapterIncorrect Tall, Lazy Flame, Orange in Color Frequently Asked Questions Troubleshooting for HomeownerGetting Started Design, Installation & Location ConsiderationsAppliance Location Floor SupportTools And Supplies Needed Castile & Santa Fe CE Pellet Stove Thermostat LocationPre-Burn Check List Inspect Appliance and ComponentsAppliance Dimensions Dimensions and ClearancesCorner Installation Alcove InstallationVertical Installation Straight Back Against WallCastile & Santa Fe CE Pellet Stove Hearth Pad Requirements Exception for Horizontal InstallationsRecommended Hearth Pad Requirements Vent Information Negative Pressure, Shut-Down and Electrical Power FailureVenting Termination Requirements Avoiding Smoke and OdorsNegative Pressure Vent ConfigurationsDraft Minimum Vacuum Requirements 0957068-112 August 19 Miniumum Vertical Vent for Two Elbows Castile & Santa Fe CE Pellet Stove Pellet Venting ChartsAlcove Venting SystemsAir Clearance to Pipe Vertical into Existing ChimneyAlternate Masonry MasonryConcrete Cap With AirspaceDegree Straight OutCastile & Santa Fe CE Pellet Stove Through The Wall Outside Air Kit Instructions Shown on Santa FE Appliance Set-UpTwo Piece Log Set Installation Thermostat InstallationContact Information

7068-112 specifications

The Quadra-Fire 7068-112 is a high-performance gas-burning fireplace designed to bring warmth and elegance to any home. With its sleek design and advanced technology, it stands out as a preferred choice for homeowners looking for both form and function.

One of the main features of the 7068-112 is its impressive heating capacity. It can efficiently heat spaces up to 2,000 square feet, making it an excellent option for larger rooms or open-concept living areas. The unit boasts an impressive thermal efficiency rating, ensuring that consumers can enjoy a cozy fire without wasting energy.

The fireplace is equipped with a variety of user-friendly controls, allowing homeowners to easily adjust the flame and heat settings to achieve their desired ambiance. It features an adjustable flame height, allowing for customization of the fire's intensity, and a remote control option for added convenience. With these controls, users can effortlessly create a comfortable atmosphere from across the room.

Another notable characteristic of the Quadra-Fire 7068-112 is its unique combustion system. The fireplace utilizes a patented technology known as the Quadra-Fire Design, which promotes efficient heat delivery and emissions control. This system ensures that gases are burned thoroughly, resulting in reduced smoke and harmful emissions. In addition, the unit is equipped with a primary air control that helps maintain optimal burning temperatures, further enhancing efficiency.

The decorative options are also impressive with the 7068-112. It features a beautiful glass front that showcases the mesmerizing flames while offering a modern look. Homeowners can choose from an array of decorative media such as river rocks or glass beads to customize the appearance of their fireplace and complement their home decor.

In terms of installation, the 7068-112 is versatile, featuring a direct vent system that allows for flexible placement in a home. This venting method ensures that fresh air is drawn from the outside while safely venting exhaust gases outdoors, making it suitable for a variety of settings.

Overall, the Quadra-Fire 7068-112 is a stylish, efficient, and customizable heating solution that combines advanced technology with beautiful design, making it a desirable addition to any home.