X Rear Suspension Installation
Part Number | Description | Qty. |
|
|
|
Shock Rear Coupe | 2 | |
|
|
|
Spring Rear Coupe | 2 | |
|
|
|
Obtain the following tools:
•3/8” impact socket
•15 mm shallow wobbly socket, 3/8” drive
•Small flat head screw driver
•Needle nose pliers
•13/16 deep socket, ½” drive
•10 mm wrench
•Hack saw
•
Order of Operations:
1.Place the top of the spring (the end with the shorter vertical distance between coils) into the mounting location, making sure the stock rubber boot is in place. The top of the spring has shortened vertical distances between the coils. Install both springs before next step. Make sure to use the stock rubber boots on top and bottom of the springs. (Figure 1)
2.Put the bottom of the shock into the bolting location. With the top lined up with the trunk hole, tighten bottom of shock. Decal faces rear fascia. Use a 15 mm socket with a 3/8” impact gun. (Figure 2) Repeat on other side.
3.Remove the white cover from the shock decal.
Figure 1
Figure 2
19