I Wheel Removal
Obtain the following tools:
•13/16” deep socket, ½” drive
•½” impact gun
Order of Operations:
1.Jack up the front of the car, and place jack stands underneath the chassis members.
2.Lower the car onto the jack stands. The car should stay in this position for the entire front suspension replacement.
3.Remove five 13/16” nuts using the 1/2” air gun and 13/16” deep socket. (Figure 1) Be careful when you remove the last nut, as the wheel could fall off.
4.Remove wheel; repeat on other side of car.
Figure 1
7