United States Stove 6037 owner manual Circuit Board Functions

Page 18

CIRCUIT BOARD FUNCTIONS continued...

SHUTDOWN SEQUENCE OF EVENTS

Once the AMERICAN HARVEST has reached the normal operating temperature and switched to the “OFF” position, the unit will continue to operate on a much lower setting for 10 minutes. (Approximately half of the “1” setting). After 10 minutes the auger will slow down further and continue at this feed rate until the AMERICAN HARVEST “LOW LIMIT SAFTEY” sensor tells the control board it is safe to shutdown.

COMPONENT

SHUTDOWN

OPERATION END

Exhaust Blower

Unchanged operation until preset

Continues until the operating tempera-

 

“OFF” temperature is achieved.

ture falls below 90 degrees. May take

 

 

several minutes up to an hour.

 

 

 

Agitator

Continues at a lower sequence

Continues until the operating tempera-

 

 

ture falls below 90 degrees.

 

 

 

Auger

Slows down to a “HALF SETTING” for

The auger will continue at the lower

 

10 minutes and then to a “QUARTER

feed rates until the operating

 

SETTING” for the duration of the shut-

temperature falls below 90 degrees.

 

down.

NOTE: Safety switches, HI limit and

 

 

vacuum sensor, must be activated to

 

 

continue proper operation.

 

 

 

Room Fan

Unchanged operation until preset

Will continue to operate until the

 

“OFF” temperature is achieved.

AMERICAN HARVEST cools down to

 

 

below 90 degrees. This may take sev-

 

 

eral minutes up to an hour.

 

 

 

Automatic Shutdown

If the American Harvest “HI LIMIT”

It is rare that the HI LIMIT temperature

 

sensor snaps open, this will cause an

is reached. However, should this error

 

automatic shutdown. This will be evi-

occur, let the AMERICAN HARVEST

 

dent by the green light on the control

cool down for an hour then restart.

 

board flashing. NOTE: “HI LIMIT” er-

 

 

rors are usually the result of operating

 

 

at the highest heat setting for long

 

 

periods of time, room fan failure or

 

 

loose wire connection.

 

 

 

 

CAUTION: When performing any internal electrical maintenance

•Moving parts inside of the cabinet may cause injury. Do not operate unit with panels removed or open.

•HOT parts. Do not operate the unit with panel open.

•Risk of electric shock. Disconnect power before servicing unit.

•In the event of component failure, replace with the original factory equipment.

18

USSC

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 6037 Specifications Heat OutputSafety Steps Burning Solid FuelsInstallation Requirements Burning Solid FuelsClearances to Combustibles Parallel aGuidelines for Exhaust Venting Systems Design Design Guidelines for Outside Combustion AIR Connection Installation Configurations Mobile Home Installation RequirementsFreestanding Stove Installation Requirements Horizontal Exhaust TerminationUssc Glass MAINTENANCE, Removal and Replacement Cleaning the GlassRemoval of Broken or Damaged Ceramic Glass Stove Controls Lighting Instructions Damper Control FunctionDisposal of Ashes Setting the DraftMaintenance Instructions Disposal of AshesMaintenance Instructions Spring CleaningAutomatic Safety Features Fuel AdditiveCircuit Board Functions START-UP Sequence of EventsCircuit Board Functions Trouble Shooting ProblemWiring Diagram Repair Parts DIAGRAM-6037 Repair Parts LIST-6037 Ussc HOW to Order Repair Parts

6037 specifications

The United States Stove 6037 is a multifaceted pellet stove that blends efficiency, performance, and modern technology, making it an excellent choice for homeowners seeking an alternative heating source. Designed with the intention of heating medium to large-sized spaces, this stove is equipped with a robust hopper capacity and an impressive heating output, ensuring that your home remains warm and comfortable during the colder months.

One of the standout features of the United States Stove 6037 is its large pellet hopper, which can hold up to 40 pounds of pellets. This means less frequent refueling, allowing you to enjoy extended burning sessions without interruption. The stove has a maximum heat output of 45,000 BTUs, making it capable of heating an area of up to 2,200 square feet. This makes it suitable for larger homes or open floor plans where consistent warmth is a necessity.

The 6037 is equipped with advanced technology, including an automatic igniter and a sophisticated control panel that allows for easy operation and adjustment of settings. The digital control panel offers programmable settings, enabling homeowners to set specific heating schedules according to their needs. This programmable feature promotes energy savings by allowing the stove to operate only when necessary.

Safety is also a top priority with the United States Stove 6037. It comes with a built-in safety shut-off feature that automatically turns off the stove if it overheats or if the temperature exceeds safe limits. The stove’s construction includes a heavy-duty steel body and a sleek design, providing durability while also enhancing the aesthetic appeal of your living space.

The United States Stove 6037 is designed for easy maintenance, with a removable ash pan that simplifies the cleanup process. Regular maintenance is vital for the efficient operation of any pellet stove, and this model has been constructed to facilitate straightforward access to essential components.

In conclusion, the United States Stove 6037 is a versatile and efficient pellet stove that combines modern features with robust performance. It is an ideal solution for those looking for an eco-friendly, cost-effective heating option that doesn't compromise on comfort or safety. With its impressive BTU output, large pellet capacity, and user-friendly controls, the 6037 stands out in the market for its practicality and reliability, helping to keep homes warm and inviting throughout the winter months.
Top Page Image Contents