United States Stove 6037 instruction

GUIDELINES FOR EXHAUST VENTING SYSTEMS DESIGN

It is recommended that only an authorized installer install your pellet/corn stove, preferably an NFI certified specialist. The following installation guidelines must be followed to ensure conformity with both the safety listing of this stove and to local building codes.

INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENT MANUFACTURER.

•A UL listed 3” or 4” type “PL” pellet vent exhaust system must be used for installation and attached to the pipe connector provided on the back of the stove. Use a 3” to 4” adapter for 4” pipe. A cap must be used at the termination of type “L” vent chimneys. 4” PL is required for elevations above 2,500 feet above sea level.

•Do not terminate vent in any enclosed or semi-enclosed area, such as; carports, garage, attic, crawl space, under a sundeck or porch, narrow walkway or close area, or any location that can build up a concentration of fumes such as a stairwell, covered breezeway etc.

•Vent surfaces can get hot enough to cause burns if touched by children. Noncombustible shielding or guards may be required.

•Do not install a flue damper in the exhaust vent of this unit.

•Termination must exhaust above air inlet elevation. Installation MUST include three (3) vertical feet of pellet vent pipe. This will create some natural draft to prevent the possibility of smoke or odor during appliance shutdown and to keep exhaust from causing a nuisance or hazard from exposing people or shrubs to high temperatures. Do not connect this unit to a chimney flue serving another appliance. Do not connect directly to a masonry chimney.

•Distance from doors and windows, gravity or ventilation air inlet into building:

Not less than 4 ft./1.2m below, 4ft./1.2m horizontally from, 1ft./305mm above(This does not apply if the windows are non-opening or have been fixed so they cannot open.)

•Distance from bottom of termination and grade-1ft./305mm minimum. This is conditional upon the plants and nature of grade surface. The exhaust gases are not hot enough to ignite grass, plants or shrubs located in the vicinity of the termination. The grade surface must not be a lawn. Distance from bottom of termination and public walkway is 7ft./ 2.1m minimum.

•Distance to combustible materials-2ft./610mm. This includes adjacent building, fences, protruding parts of the struc- ture, roof overhang, plants and shrubs, etc.

•The installation must include a cleanout tee to enable collection of fly ash and to permit periodic cleaning of the exhaust system. 90° elbows accumulate fly ash and soot thereby reducing exhaust flow and performance of the stove. Each elbow or tee reduces draft potential by 30% to 50%.

•Total length of horizontal vent must not exceed 48”(4ft.)/1,200mm. All joints in the vent system must be fastened by at least 3 screws, and all joints must be sealed with RTV silicone sealer to be airtight.

•The “PL” vent or single wall stainless exhaust system must be installed so as to be GAS TIGHT! The vent manufacturer’s installation procedures must be followed. In addition, pipe connections, joints and all pipe seams within the home should be sealed with high temperature RTV silicone sealer.

•The area where the vent pipe penetrates to the exterior of the home must be sealed with silicone or other means to maintain the vapor barrier between the exterior and the interior of the home.

NOTE: These are guidelines only. Proper venting is accomplished by design and common sense. In most installations 3” inch diameter venting is adequate. If it does not vent properly you will have to change it to 4”.

DO NOT CONNECT TO ANY AIR DISTRIBUTION DUCT OR SYSTEM

USSC

6037 specifications

The United States Stove 6037 is a multifaceted pellet stove that blends efficiency, performance, and modern technology, making it an excellent choice for homeowners seeking an alternative heating source. Designed with the intention of heating medium to large-sized spaces, this stove is equipped with a robust hopper capacity and an impressive heating output, ensuring that your home remains warm and comfortable during the colder months.

One of the standout features of the United States Stove 6037 is its large pellet hopper, which can hold up to 40 pounds of pellets. This means less frequent refueling, allowing you to enjoy extended burning sessions without interruption. The stove has a maximum heat output of 45,000 BTUs, making it capable of heating an area of up to 2,200 square feet. This makes it suitable for larger homes or open floor plans where consistent warmth is a necessity.

The 6037 is equipped with advanced technology, including an automatic igniter and a sophisticated control panel that allows for easy operation and adjustment of settings. The digital control panel offers programmable settings, enabling homeowners to set specific heating schedules according to their needs. This programmable feature promotes energy savings by allowing the stove to operate only when necessary.

Safety is also a top priority with the United States Stove 6037. It comes with a built-in safety shut-off feature that automatically turns off the stove if it overheats or if the temperature exceeds safe limits. The stove’s construction includes a heavy-duty steel body and a sleek design, providing durability while also enhancing the aesthetic appeal of your living space.

The United States Stove 6037 is designed for easy maintenance, with a removable ash pan that simplifies the cleanup process. Regular maintenance is vital for the efficient operation of any pellet stove, and this model has been constructed to facilitate straightforward access to essential components.

In conclusion, the United States Stove 6037 is a versatile and efficient pellet stove that combines modern features with robust performance. It is an ideal solution for those looking for an eco-friendly, cost-effective heating option that doesn't compromise on comfort or safety. With its impressive BTU output, large pellet capacity, and user-friendly controls, the 6037 stands out in the market for its practicality and reliability, helping to keep homes warm and inviting throughout the winter months.