Safety Steps, Burning Solid Fuels | United States Stove 6037

SAFETY STEPS

IMPORTANT: Proper installation of this stove is necessary for safe and efficient operation. Installing this product improperly may result in a house fire and personal injury. All applicable building codes for your location must be followed. In areas where building codes require additional steps to the installation of this product not included in this manual the building codes will take precedent and must be followed. Contact your local building inspector to obtain any necessary permits or inspection guidelines before installing the product.

•The American Harvest stove is designed to burn dry shelled corn, cherry pits, or pelletized fuel such as wood pellets. The burning of other solid fuels such as cord wood or wood chips in this stove is not permitted.

•This product requires simple periodic maintenance for proper operation and long life of the stove. Read and follow the maintenance schedule closely.

•DISCONNECT THE POWER CORD BEFORE SERVICING THIS STOVE!

•A power surge protector is required. The unit must be plugged in to a grounded 110-volt power source.

•Always route the power cord away from the unit. Do not route cord in foot traffic areas. Do not pinch cord under furniture.

•A working smoke detector must be installed in the same room as this product.

•Flammable or explosive liquids such as gasoline, naphtha, alcohol or engine oil must NEVER be used in or around this stove. These liquids must be stored well away from this stove as the open flame in the burner chamber could ignite the fumes of such liquids. Do not burn garbage in this unit.

•The moving parts of this stove are propelled by high torque electric motors. The auger and Fuel Agitator can cause severe injury to body parts that may get near them. Keep all body parts away from the auger and Fuel Agitator while the stove is plugged into an electrical outlet. These moving parts may begin to move at any time while the stove is plugged in.

•According to HUD requirements, when installed in a mobile home, this stove must be grounded directly to the steel chassis of the mobile home and bolted to the floor. Direct air access must be provided - Use 67FAK Fresh Air Kit

•This stove is not intended for use in commercial installations.

•Do not connect this stove to “B” vent. Use UL Listed Pell Vent ONLY!

BURNING SOLID FUELS

Ashes will have to be Removed from the stove periodically. See cleaning procedure. You can minimize cleaning required and maximize efficiency by maintaining the correct draft settings. See “Setting the Draft” further in the manual.

The draft setting on your stove may have to be changed from time to time to accommodate your specific burning conditions. Proper draft setting will be discussed later in this manual. The point we wish to make here is that your American Harvest stove, due to the nature of solid fuels, will require brief periodic attention. Please do not expect to light your stove and walk away from it. A few moments of adjustment and cleaning from time to time is an important part of burning solid fuels, due to the vast differences in fuel, humidity and outside temperature.

The American Harvest stove has been designed to burn dry shelled corn, wood pellets and other pelletized fuels that meet Association of Pellet Fuel Industries standards.

USSC

6037 specifications

The United States Stove 6037 is a multifaceted pellet stove that blends efficiency, performance, and modern technology, making it an excellent choice for homeowners seeking an alternative heating source. Designed with the intention of heating medium to large-sized spaces, this stove is equipped with a robust hopper capacity and an impressive heating output, ensuring that your home remains warm and comfortable during the colder months.

One of the standout features of the United States Stove 6037 is its large pellet hopper, which can hold up to 40 pounds of pellets. This means less frequent refueling, allowing you to enjoy extended burning sessions without interruption. The stove has a maximum heat output of 45,000 BTUs, making it capable of heating an area of up to 2,200 square feet. This makes it suitable for larger homes or open floor plans where consistent warmth is a necessity.

The 6037 is equipped with advanced technology, including an automatic igniter and a sophisticated control panel that allows for easy operation and adjustment of settings. The digital control panel offers programmable settings, enabling homeowners to set specific heating schedules according to their needs. This programmable feature promotes energy savings by allowing the stove to operate only when necessary.

Safety is also a top priority with the United States Stove 6037. It comes with a built-in safety shut-off feature that automatically turns off the stove if it overheats or if the temperature exceeds safe limits. The stove’s construction includes a heavy-duty steel body and a sleek design, providing durability while also enhancing the aesthetic appeal of your living space.

The United States Stove 6037 is designed for easy maintenance, with a removable ash pan that simplifies the cleanup process. Regular maintenance is vital for the efficient operation of any pellet stove, and this model has been constructed to facilitate straightforward access to essential components.

In conclusion, the United States Stove 6037 is a versatile and efficient pellet stove that combines modern features with robust performance. It is an ideal solution for those looking for an eco-friendly, cost-effective heating option that doesn't compromise on comfort or safety. With its impressive BTU output, large pellet capacity, and user-friendly controls, the 6037 stands out in the market for its practicality and reliability, helping to keep homes warm and inviting throughout the winter months.