United States Pumice Company WG-3036G, WG-2424G 121 p/n 45324 OpManual Built-In Electric Griddles

Page 9

IMPORTANT:

PRESSURE TESTING MUST

BE PERFORMED BY A

QUALIFIED TECHNICIAN

ONLY.

NOTE: The maximum inlet pressure from the supply piping must not exceed ½ p.s.i (14” W.C.) Pressure above this limit will damage the regulator and gas valves.

Port for measuring outlet gas pressure is located on the manifold. Remove the grease drawer to gain access. Remove the allen head plug sealing the test port, then connect the hose of a water column gauge.

Be sure to reinstall the allen head plug at the conclusion of testing.

121 p/n 45324 OpManual Built-In Electric Griddles

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Countertop GAS Griddles Models 121 p/n 45324 OpManual Countertop Gas Griddles Table of Contents SpecificationsIntroduction Located on rear of unit STD Agency Approval Information121 p/n 45324 OpManual Countertop Gas Griddles 121 p/n 45324 OpManual Built-In Electric Griddles Fire Explosion Hazard 121 p/n 45324 OpManual Built-In Electric Griddles Adjust gas pressure Important Scratches will Damage the CHROME- Surface Lighting Instructions are posted on inside of front panel Recommended Cooking Times and Temperatures Using the GriddleBurn Hazard Cleaning Instructions Standard and Grooved GriddlesCleaning Instructions Chrome Plated Griddles Description Possible Problem Suggested Remedy TroubleshootingDescription Service Part no Parts & ServiceGenuin e Parts
Top Page Image Contents