40 Reference
Included Accessories
1 oven rack for the top Speedcook oven
2 oven racks (1 standard/1 roller) for the bottom oven (Double Wall Oven Only) Meat probe for the bottom oven (Double Wall Oven Only)
TurboChef Cookbook
Cabinet Dimensions |
| 30˝ Double Wall | 30˝ Single Wall | ||
|
|
|
|
|
|
Cabinet | Width (min) | 30˝ | (762 mm) | 30˝ | (762 mm) |
|
|
|
|
|
|
| Wood Fascia Thickness (min) | 3/8˝ | (10 mm) | 3/8˝ | (10 mm) |
|
|
|
|
|
|
Rough Wall Opening | Height (min/max) | 48 7/8˝ | (1241 mm) | 25 1/8˝ | (638 mm) |
| Width (min/max) | 28½˝ | (724 mm) | 28½˝ | (724 mm) |
|
|
|
|
|
|
| Upper Corner Radius (preferred) | ½˝ | (13 mm) | ½˝ | (13 mm) |
|
|
|
|
|
|
| Depth (min) | 24˝ | (610 mm) | 24˝ | (610 mm) |
|
|
|
|
|
|
|
|
|
|
|
|
Cabinet Base Height | Wall Installations (min) | 11˝ | (279 mm) | 34¾˝ | (883 mm) |
|
|
|
|
|
|
| Wall Installations (max) | 15˝ | (381 mm) | 38¾˝ | (984 mm) |
|
|
|
|
|
|
| Under Counter Installations (min) | n/a |
| 5½˝ | (140 mm) |
|
|
|
|
|
|
NOTE: Failure to adhere to the Rough Wall Opening specs may cause corners of the cabinet opening to be exposed.
Proper Cabinet preparation
Cabinets should be cut according to supplied dimensions. If the oven is being installed near a wall or door, there should be at least ¼ inch space between the wall/door and the side of the oven door.
TurboChef recommends using standard 2 x 4 support posts with a minimum of ½ inch solid base to support the oven. Support posts should be level with the floor line and
Due to the oven frame’s overall depth, the power supply line location shown in the illustrations on the following page (high or low conduit box) must be adhered to in order to obtain a proper fit in the cabinet. If necessary due to a low or high conduit box, a
The oven utilizes ambient air from the kitchen to assist in keeping the operational components cool. This air is drawn in through the top control panel area through openings in the top access panel and exhausted through an opening at the base of the oven. Please allow a 1 inch minimum clearance above and below these areas.
If you have any questions or concerns about how the cabinets are built, contact TurboChef Customer Service 866.44serve (866.447.3783) before installing the oven.