2nd Ave DVP-0204520-02 operation manual DeviceNet Network Control, Rtu-Dnet

DeviceNet Network Scanner DVPDNET-SL

Slave → DVPDNET-SL

Register in		Devices in slave
DVPDNET-SL
D6037H	Digital I/O module	X0 ~ X7 on DVP-16SP
D6037L		N/A
D6038H		Status of LED on VFD-B
D6038L	AC motor drive	Status of VFD-B
D6039H		High byte of frequency in VFD-B
		Low byte of frequency in VFD-B
D6039L

„If the I/O data include control word and status word of RTU-DNET, the I/O data mapping of DVPDNET-SL and its slave devices will be:

DVPDNET-SL → slave

Register in		Devices in slave
DVPDNET-SL
D6287H	RTU-DNET	High byte of control word in RTU-DNET
D6287L	control word	Low byte of control word in RTU-DNET
D6288H	Digital I/O module	Y0 ~ Y7 on DVP-16SP
D6288L		N/A
D6289H		High byte of command in VFD-B
D6289L	AC motor drive	Low bye of command in VFD-B
D6290H		High byte of frequency in VFD-B
D6290L		Low byte of frequency in VFD-B
Slave → DVPDNET-SL
Register in		Devices in slave
DVPDNET-SL
D6037H	RTU-DNET	High byte of status word in RTU-DNET
D6037L	status word	Low byte of status word in RTU-DNET
D6038H	Digital I/O module	X0 ~ X7 on DVP-16SP
D6038L		N/A
D6039H		Status of LED on VFD-B
D6039L	AC motor drive	Status of VFD-B
D6040H		High byte of frequency in VFD-B
		Low byte of frequency in VFD-B
D6040L

3.Saving the configuration data

Select “File” => “Save” to save the current network configuration.

5.3DeviceNet Network Control

In this section, we will introduce how to compile WPL program and control DeviceNet. The example given below is particularly for I/O data excluding RTU-DNET control word and status word. You will have to slightly modify the example program if the I/O data include RTU-DENT control word and status word.

18 DVP-PLC Operation Manual