2nd Ave DVP-0204520-02 Basic Operation, Digital Indicator, I/O Module Connection Port

DeviceNet Network Scanner DVPDNET-SL

DVPDNET-SL.

zWhen DVPDNET-SL is operating, changing the setting of the function switch will be invalid.

zUse slotted screwdriver to adjust the DIP switch carefully in case you scratch the switch.

2.6Digital Indicator

The digital indicator provides the following two functions:

DVPDNET

POWER

MS

NS

1.Displaying the node address and error messages of DVPDNET-SL and error messages.

2.Displaying the error message of slave.

2.7I/O Module Connection Port

The I/O module connection port is used on connecting DVPDNET-SL to the left-side module conncection port on DVP-SV PLC MPU or to other I/O modules connected to the left side of DVP-SV.

3Basic Operation

3.1Connecting DVPDNET-SL to DVP-SV MPU

„Adjust the I/O module clip on the left side of DVP-SV.

„Meet the extension port of the MPU with DVPDNET-SL as shown in the figure below.

„Fasten the extension clip.

DVPDNET DVP28SV

RUN

STOP

3.2Installing DVPDNET-SL and DVP-SV MPU on DIN Rail

„Use 35mm DIN rail.

„Open the DIN rail clip on DVP-SV and DVPDNET-SL. Insert DVP-SV and DVPDNET-SL onto the DIN rail.

„Clip up the DIN rail clips on DVP-SV and DVPDNET-SL to fix DVP-SV and DVPDNET-SL on the DIN rail, as shown below.

DVP-PLC Operation Manual 7