Kenmore 790.754 General Care & Cleaning contd, Cleaning the Cooktop, Burner Heads, Caps & Grates

Page 25

General Care & Cleaning (cont'd)

Cleaning the Cooktop, Burner Heads, Caps & Grates

The cooktop is designed to make cleaning easier. Because the gas Burners are sealed, cleanups are easy when spillovers are cleaned up immediately.

The cooktop, Burner Heads and Caps should be routinely cleaned. Keeping the Burner Head Ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions:

THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.

THE FIXED OVEN VENT IS NOT REMOVABLE. Do not attempt to remove the fixed oven vent cover.

Use caution when replacing the Burner Caps so the Electrodes are not damaged. This may cause a delayed ignition or prevent the burner from igniting.

 

To Remove and Replace the Surface Burner Caps and Burner Heads- Remove

Surface

in the following order: (t st) surface Burner Grates, (2nd) Burner

Caps and (3rd)

Burner

Burner Heads. Replace

in the following order: Burner

Heads, Burner Caps and

Grate

BumerGrates.

 

 

 

 

Do not remove any parts from the cooktop until they have completely cooled

 

and are safe to handle.

Do not operate the surface

Burners

without the Burner ii:i,'il

 

Caps and Burner Heads properly in place.

Surface

To Clean the surface Burner Caps and Burner Heads (all models)- Use a soap-

filled scouring pad or a mild abrasive cleanser to clean the surface Burner Caps

 

 

and Burner Heads. The ports (or slots) around the Burner Heads must be routinely

 

cleaned, if residue still remains in these ports, use a small-gauge wire or needle to

 

clean the slots or holes. For proper flow of gas and ignition of the burner--DO NOT

 

ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO

 

ENTER THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface

 

Burner Caps and Burner Heads in place whenever the gas Burners are in use.

Orifice holder

Figure 1

To Clean the Burner Grates- The Burner Grates are dishwasher safe and may be

cleaned in the dishwasher. Remove any excessive soils before placing in the dishwasher.

To Clean the Ceramic Glass Cooktop- See Ceramic Glass Cooktop Cleaning & Maintenance later in this section.

Ceramic Glass Cooktop Cleaning and Maintenance

Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop

Prior to using your cooktop for the first time, apply the recommended CookTopQ Cleaning Creme to the ceramic surface (on the web visit www.sears.com for replacement cooktop cleaner, item number 40079). Buff with a non-abrasive cloth or no-scratch cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.

Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings on the cooktop surface. These marks should be removed immediately after the cooktop has cooled using the cooktop cleaning cream. Metal marks can become permanent if not removed prior to future use.

Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the cooktop surface. Do not slide anything metal or glass across the cooktop. Do not use your cooktop as a cutting board or work surface in the kitchen. Do not cook foods directly on the cooktop surface without a pan. Do not drop heavy or hard objects on the glass cooktop, because they may cause it to crack.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Sears Roebuck and Co., Hoffrnan Estates, IL 60179 U.S.A Models, modelos 790.7540@ = color number, nmero de color318200759 Rev. C Table of Contents Save these instructions for future reference Read all instructions before using this applianceImportant Safety instructions Important Safety Notice IMPORTANT Instructions for Cleaning Your RangeRecord Serial Plate LocationMaster Protection Agreements U.S.AFor prices and additional information call Conversion to Liquefied Petroleum Gas or L. P. Gas Grounding instructionsRange FeaturesAgents or ANY Other Material to Enter the GAS Before Setting Surface ControlsLocations Proper Setting Surface ControlsImproper Type of CookingUsing the Griddle Using a wokSurface Cooking Use Proper CookwareAir Circulation in the Oven Before Setting Oven ControlsOven Vent Always Arrange Oven Racks WhenFor a silent control panel Control Pad FeaturesConversion CelsiusTo Set the MinuteTimer Setting the Clock and Minute TimerTo Set Add 1 Minute Feature To set the ClockTo Set or Change the Temperature for Baking Setting Oven ControlsSetting the Warm & Hold Feature To Set Control for Continuous Bake or 12 Hour Energy SavingSetting the Warm & Hold Feature Contd Setting Oven Controls contdBaking Problems When cooking time Is upSetting the Slow Cook Feature Setting Oven Controls contdTo set for broiling BroilBroiling Times and Searing Grill InsertTo Set the Timed Bake and Delayed Timed Bake Features Setting Oven Controls To Set the Recipe Recall Feature Adjusting the Oven TemperatureTo Begin Baking with the Stored Recipe What to Expect during Cleaning Self-Cleaning Do Handclean Seal Clean Door BooLOCKEDWhen the Self-Clean Cycle is Completed Self=Clean Cycle time lengthStopping or interrupting a Self-Cleaning Cycle Cleaning Various Parts of Your Range General Care & CleaningAluminum & Vinyl Control Panel and Trim Pieces Glass, Painted and PlasticCleaning the Cooktop, Burner Heads, Caps & Grates General Care & Cleaning contdAluminum foil Cleaning Recommendations for the Ceramic Glass CooktopAluminum utensils Removing the Oven Door Storage DrawerTo Replace Oven Door To Replace the Storage DrawerBefore You Call Operation Flames inside oven or Canada MY-H 0 M E 14oo-469-4663
Top Page Image Contents