Kenmore 665.72002 manual Ion some models, PORCELAIN-COATED Grates and Caps, Surface Burners

The oven will automatically shut off once it senses it is clean. The door will not unlock unbl the oven cools.

Once the oven has completely cooled remove ash w_th a damp cloth, Do not wipe down any of the inside surfaces until the oven has completely cooled down. Applying a cool. damp cloth to the inner door glass before it has cooled completely could result in the glass breaking

The soil level can be manually set to light, average or heavy soil levels by repeatedly pressing SENS-A-CLEAN

To Start Self-Clean:

Before self-cleaning, make sure the door is closed completely or it will not lock and the cycle will not begin.

1.Press SENS-A-CLEAh

The SEnS setting will automatically determine the length of cleaning time

2.Press START ENTER.

The oven door will lock in 6 seconds and "CLN SENS. HEAT." "ON " "LOCKED." and CLEAN" will aePear on the

alsplay The door will not unlock until the oven cools. The cycle time includes a 30 minute cool down time

When the cycle is complete and the oven cools "End" will appear on the display and "LOCKED" will d_sappear.

3.Press OFF/CANCEL or open tne aoor [o remove "End" frorr the display

4.Close aoor.

The time of day will appear on the display.

To Delay Start Self-Clean:

Before delay s[amng Self-Clean make sure the clock is set to the correct time of day, See "Clock" section Also make sure the door is closed completely or it will not lock and the cycle will no[ Begin,

1, Press SENS-A-CLEAN

The SEnS setting will automatically determine the length of cleaning time

If desired set the aDeroriate soil level by repeatedly pressing the SENS-A-CLEAN Dan,

2.Press DELAY START,

Press HOUR/MIN "up" or "down" arrow pads to set the ume of clay to start the Self-Cleaning cycle.

3.Press START ENTER.

The door will automatically lock and "LOCKED "DELAY" and the time of day will appear on the display.

When the start time is reached the oven will automatically

[urn on

When the cycle _scomplete and the oven cools "End" will appear on the diSDlay and "LOCKED" will disappear.

4.Press OFF/CANCEL or open the aoor [o remove "End" from the d_selay

5.Close ooor.

The time of day will appear on the display.

To Manually Set Soil Level:

•Press twice for light soils and "SoilL" will appear on the o_splay.

•Press three times for average soils and "SoilA" will appear on the display

•Press four times for heavy soils, and "SoilH" will appear on the display

The oven light will not work during the Self-Cleaning cycle.

To Step Self-Clean any time:

Press OFF!CANCEL, and "cln." "ON," "cool," ano "LOCKED" wil appear on the display until the oven cools. Then "End" will appear and the door will unlock

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products.

Soap water and a soft cloth or sponge are suggested first unless otherwise noted

EXTERIOR PORCELAIN ENAMEL SURFACES

Ion some models)

Fooa soills containing acids, such as vinegar ana tomato shoulc be cleaned as soon as [he entire appliance is cool, These SPillS

may affect the finish

•Glass cleanen mild liquid cleaner or non-abrasive scrubbing Dad:

Gently clean around the model and serial number elate Decause scrUDDIng may remove numbers

PORCELAIN-COATED GRATES AND CAPS

Fooa soills containing ac=as, such as vinegar and tomato shoulc be cleaned as soon as the cooktop, grates and caos are cool these SDilISmay affect the finish,

To avoid chiDeing, do not bang grates ano caps against each other or hard surfaces such as cast iron cookware.

Do no[ reassemble caos on burners while wet,

Do not clean in the Self-Cleaning cycle

•Non-abrasive plastic scrubbing pad and mildly abrasive cleanser:

Clean as soon as cooktoD, grates and caps are coo

•Dishwasher (grates only, not capsf Use the most aggresswe cycle.

SURFACE BURNERS

Sealed Burner models

See "Sealed Surface Burners" section

COOKTOP CONTROLS

Do not use steel wool abrasive cleansers or oven cleaner.

Do not Soak knobs

When replacing knobs make sure knobs are in the OFF position. On some models do not remove seals under knobs.

•Soao and water or dishwasher:

Pull knobs straight away from control aanel [o remove.

CONTROLPANEL

Do not use abrasive cleaners steel-wOOl 3ads. gritty wash cloths or some paper towels. Damage may occur

•Glass cleaner and soft cloth or sponge:

ADDly glass cleaner to soft cloth or sponge, not directly on panel

2O