Kenmore 721.80043, 721.80049, 721.80042 Step Prepare the Venting Blower, Room Vented Installation

Page 10

STEP 3:

PREPARE THE VENTING BLOWER

Your microwave oven is shipped with the blower assembled for room venting (recirculating). You need to adjust the blower if you want wall vented or roof vented installation.

WARNING

ELECTRICAL SHOCK HAZARD! UNPLUG UNIT BEFORE WORKING ON IT.

DO NOT PULL OR STRETCH THE BLOWER WIRING! Pulling and stretching the blower wiring could result in electrical shock.

1.Remove any shipping materials and parts from inside the microwave oven.

2.Cover the counter top or cooktop with a thick, protective covering to protect it from damage and dirt. See Figure 10.

NOTE: If you have a free-standing range, disconnect it, move it onto a piece of cardboard or hardboard and pull it away from the wall, so that you can get closer to the upper cabinet and back wall for easier measuring and drilling.

3.Remove mounting plate 2 screws from the mounting plate as shown and discard them.

(See Figure 11.)

4.The mounting plate will also be used to locate and mark the mounting holes on the rear wall.

5.Locate exhaust adaptor, grease filters and hardware packet.

6.At this point, remove any adhesive tape (if there is any), on the exhaust adaptor, the grease filters and the power supply cord.

ROOM VENTED INSTALLATION:

Go to STEP 4, PREPARE THE WALL AND UPPER

CABINET FOR INSTALLATION located on page 13.

A thick protective

covering

/

Figure 10

I

Mounting plate

Mounting plate

f

screw

(2 screws)

 

--Control Panel Side

Figure 11

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installationinstructions For Your Safety Your Safety FirstBe Sure to Read the Following Safety Instructions Proper installation is the installers responsibilityTo excessive microwave energy Property damage One power cord clamp Damper/duct connectorOne power cord clamp bushing One upper cabinet template Not ActualPARTS, TOOLS, Materials Avoid Electrical SHOCK! this Appliance Must be Grounded Power-Supply-Cord HolePrepare Electrical Connections UpperIThis Oven Must be Properly Vented Remember AS YOU Install the VentingStep Prepare the Venting System Wall Venting Roof VentingStandard Fittings Duct LengthStep Prepare the Venting Blower Room Vented InstallationElectrical Shock HAZARD! Unplug Unit Before Working on IT Wall Vented Installation Step Prepare the Venting Roof Vented InstallationBlower Prepare the Wall and Upper Cabinet for Installation Measure and Tack / Tape UP TemplateCabinet front filler block cabinet bottom shelf Oven Must be Connected To AT Least ONE Wall Stud Install the Mounting Plate to the WallCenter Line Install the Mounting Plate to the Wall Step Ttach the Oven to the Wall Step Attach the Oven to the Wall Memo

721.80044, 721.80043, 721.80042, 721.80049 specifications

The Kenmore series of microwave ovens, specifically models 721.80049, 721.80042, 721.80043, and 721.80044, represent a blend of advanced technology and user-friendly features designed to elevate the cooking experience in modern kitchens.

Each model in this series boasts a sleek and stylish design, making them a perfect fit for any kitchen décor. Their compact size ensures they are space-efficient, yet they offer generous interior capacity, allowing users to accommodate a variety of dish sizes. The stainless steel finish not only enhances their aesthetic appeal but also contributes to their durability and ease of cleaning.

One of the standout features across these models is the sensor cooking technology. This innovation automatically adjusts cooking time and power levels based on the moisture released from the food, ensuring perfectly cooked results every time. Whether you're defrosting meat or reheating leftovers, the precise cooking capabilities minimize the risk of overcooking or drying out food.

These models also include multiple power levels and pre-programmed cooking settings catering to a broad range of dishes. Users can easily access options for popcorn, baked potatoes, and frozen dinners, simplifying meal prep. The intuitive control panel is designed for ease of use, featuring clearly labeled buttons and an LCD display that provides clear feedback during operation.

Furthermore, the models incorporate a turntable feature that promotes even cooking by rotating the dishes as they heat. An easy-to-remove glass turntable simplifies cleaning, allowing users to maintain a hygienic cooking environment with minimal effort.

Safety is also a priority with these Kenmore microwaves. They come equipped with a child safety lock, providing peace of mind for families with young children. The ventilation system ensures that any steam or smoke produced during cooking is efficiently expelled, contributing to a safer kitchen atmosphere.

Overall, the Kenmore 721.80049, 721.80042, 721.80043, and 721.80044 microwave ovens are designed to offer convenience, reliability, and versatility. With their modern features, user-friendly interfaces, and thoughtful safety mechanisms, these models cater to the needs of diverse households, making them an excellent addition to any kitchen.
Top Page Image Contents