Kenmore 721.80049, 721.80042, 721.80043, 721.80044 Install the Mounting Plate to the Wall

Page 16

STEP 5: INSTALL THE MOUNTING

PLATE TO THE WALL

TO PREPARE THE REAR WALL

CUTOUT OPENING AND EXHAUST

ADAPTOR/MOUNTING PLATE FOR

WALL VENTING AND ROOF VENTING:

NOTE: If room vented installation is used, skip this step.

1.Using the Wall-template.This template will give the location and size of the box cutout for the rear wall duct as described in step 5 item 1(page 15)

2.Using a pencil, put dots through slots "F" and "G", and through holes "H" and 'T'Remove. the mounting plate and draw lines extending through the points. This will give the location and size of the box cutout for the rear wall duct. See Figure 28.

•Attach the exhaust adaptor to the rear mounting plate by sliding it into the guides at the top center of the plate on the wall side. Push in securely until it is past the top locking tabs and in the lower locking tabs. Take care to assure the damper hinge is installed so that it is at the top and that the damper swings freely.

•Carefully guide the exhaust adaptor, now attached to the mounting plate, into the house duct, before using the screws to attach the plate to the wall. This will assure proper alignment for installation. See Figure 29.

•Return to step 5, item 3 (page 15) to continue. After completing the installation of the mounting plate, again check the rear damper for free movement to assure it will operate properly.

•

_':-

REAR WALLTEMPLATE

-

Figure 28

Exhaust Adaptor

Damper

(hinge side up)

 

 

 

 

Plate

Slide exhaust

(wall side)

 

 

adaptor

into

 

guides

on

 

rear panel.

 

Locking

/

Tabs

Guides

o

 

Figure 29

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Installationinstructions Your Safety First Be Sure to Read the Following Safety InstructionsFor Your Safety Proper installation is the installers responsibilityTo excessive microwave energy Property damage Damper/duct connector One power cord clamp bushingOne power cord clamp One upper cabinet template Not ActualPARTS, TOOLS, Materials Power-Supply-Cord Hole Prepare Electrical ConnectionsAvoid Electrical SHOCK! this Appliance Must be Grounded UpperIRemember AS YOU Install the Venting Step Prepare the Venting SystemThis Oven Must be Properly Vented Wall Venting Roof VentingStandard Fittings Duct LengthStep Prepare the Venting Blower Room Vented InstallationElectrical Shock HAZARD! Unplug Unit Before Working on IT Wall Vented Installation Step Prepare the Venting Roof Vented InstallationBlower Prepare the Wall and Upper Cabinet for Installation Measure and Tack / Tape UP TemplateCabinet front filler block cabinet bottom shelf Oven Must be Connected To AT Least ONE Wall Stud Install the Mounting Plate to the WallCenter Line Install the Mounting Plate to the Wall Step Ttach the Oven to the Wall Step Attach the Oven to the Wall Memo

721.80044, 721.80043, 721.80042, 721.80049 specifications

The Kenmore series of microwave ovens, specifically models 721.80049, 721.80042, 721.80043, and 721.80044, represent a blend of advanced technology and user-friendly features designed to elevate the cooking experience in modern kitchens.

Each model in this series boasts a sleek and stylish design, making them a perfect fit for any kitchen décor. Their compact size ensures they are space-efficient, yet they offer generous interior capacity, allowing users to accommodate a variety of dish sizes. The stainless steel finish not only enhances their aesthetic appeal but also contributes to their durability and ease of cleaning.

One of the standout features across these models is the sensor cooking technology. This innovation automatically adjusts cooking time and power levels based on the moisture released from the food, ensuring perfectly cooked results every time. Whether you're defrosting meat or reheating leftovers, the precise cooking capabilities minimize the risk of overcooking or drying out food.

These models also include multiple power levels and pre-programmed cooking settings catering to a broad range of dishes. Users can easily access options for popcorn, baked potatoes, and frozen dinners, simplifying meal prep. The intuitive control panel is designed for ease of use, featuring clearly labeled buttons and an LCD display that provides clear feedback during operation.

Furthermore, the models incorporate a turntable feature that promotes even cooking by rotating the dishes as they heat. An easy-to-remove glass turntable simplifies cleaning, allowing users to maintain a hygienic cooking environment with minimal effort.

Safety is also a priority with these Kenmore microwaves. They come equipped with a child safety lock, providing peace of mind for families with young children. The ventilation system ensures that any steam or smoke produced during cooking is efficiently expelled, contributing to a safer kitchen atmosphere.

Overall, the Kenmore 721.80049, 721.80042, 721.80043, and 721.80044 microwave ovens are designed to offer convenience, reliability, and versatility. With their modern features, user-friendly interfaces, and thoughtful safety mechanisms, these models cater to the needs of diverse households, making them an excellent addition to any kitchen.
Top Page Image Contents