Kenmore 721.80042, 721.80049, 721.80043 Prepare the Wall and Upper Cabinet for Installation

Page 13

STEP 4: PREPARE THE WALL AND UPPER CABINET FOR INSTALLATION

MEASURE AND TACK / TAPE UP THE

TEMPLATE

1. Using a plumb line and (metal) measuring tape, find

and mark the vertical center line (_)on the back wall, as in Figure 22.

2. Find and mark one or two points where the studs

 

 

are on the wall (Studs are normally 16 inches apart.)

--

i

and then measure and mark the stud locations. If

 

 

you cannot find any wall stud, consult a local

 

I

building contractor.

 

I

 

 

i

CAUTION

m

DO NOT ATTEMPT TO INSTALL THE

MICROWAVE OVEN IF YOU CANNOT FIND A

WALL STUD.

3.Line up the plumb line on the wall with the center line on the mounting plate.

NOTE: Be sure the minimum width is 30 inches and the distance from the top of the mounting plate to the range or counter top is at least 30 inches. See Figure 4 on page 4.

4.Center mounting plate in opening by lining up the plumb line on wall with centerline on mounting plate. Make sure the minimum width is 30 inches and that

the top of the mounting plate is located a minimum of 30 inches above the cooking surface.

See Figure 23.

NOTE: If the front edge of the cabinet is lower than the back edge, adjust the mounting plate to be level with the cabinet front.

5.Measure the bottom of the upper cabinet frame. Trim the edges "A", "B" and "C" on the upper cabinet template so that the template will fit on the bottom of the upper cabinet. If upper cabinet has a recessed frame, trim template so that it fits inside the recessed area. Align the centerline of the upper cabinet template with the centerline of the mounting plate; then securely tape or tack the upper cabinet template in place. See Figure 23.

Figure 22

upp_ c@bj99t temqlate o°

o_,....... j, o

mounting plate

(3 pieces mounting plate)

Figure 23

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installationinstructions Be Sure to Read the Following Safety Instructions Your Safety FirstFor Your Safety Proper installation is the installers responsibilityTo excessive microwave energy Property damage One power cord clamp bushing Damper/duct connectorOne power cord clamp One upper cabinet template Not ActualPARTS, TOOLS, Materials Prepare Electrical Connections Power-Supply-Cord HoleAvoid Electrical SHOCK! this Appliance Must be Grounded UpperIStep Prepare the Venting System Remember AS YOU Install the VentingThis Oven Must be Properly Vented Wall Venting Roof VentingDuct Length Standard FittingsStep Prepare the Venting Blower Room Vented InstallationElectrical Shock HAZARD! Unplug Unit Before Working on IT Wall Vented Installation Step Prepare the Venting Roof Vented InstallationBlower Measure and Tack / Tape UP Template Prepare the Wall and Upper Cabinet for InstallationCabinet front filler block cabinet bottom shelf Oven Must be Connected To AT Least ONE Wall Stud Install the Mounting Plate to the WallCenter Line Install the Mounting Plate to the Wall Step Ttach the Oven to the Wall Step Attach the Oven to the Wall Memo

721.80044, 721.80043, 721.80042, 721.80049 specifications

The Kenmore series of microwave ovens, specifically models 721.80049, 721.80042, 721.80043, and 721.80044, represent a blend of advanced technology and user-friendly features designed to elevate the cooking experience in modern kitchens.

Each model in this series boasts a sleek and stylish design, making them a perfect fit for any kitchen décor. Their compact size ensures they are space-efficient, yet they offer generous interior capacity, allowing users to accommodate a variety of dish sizes. The stainless steel finish not only enhances their aesthetic appeal but also contributes to their durability and ease of cleaning.

One of the standout features across these models is the sensor cooking technology. This innovation automatically adjusts cooking time and power levels based on the moisture released from the food, ensuring perfectly cooked results every time. Whether you're defrosting meat or reheating leftovers, the precise cooking capabilities minimize the risk of overcooking or drying out food.

These models also include multiple power levels and pre-programmed cooking settings catering to a broad range of dishes. Users can easily access options for popcorn, baked potatoes, and frozen dinners, simplifying meal prep. The intuitive control panel is designed for ease of use, featuring clearly labeled buttons and an LCD display that provides clear feedback during operation.

Furthermore, the models incorporate a turntable feature that promotes even cooking by rotating the dishes as they heat. An easy-to-remove glass turntable simplifies cleaning, allowing users to maintain a hygienic cooking environment with minimal effort.

Safety is also a priority with these Kenmore microwaves. They come equipped with a child safety lock, providing peace of mind for families with young children. The ventilation system ensures that any steam or smoke produced during cooking is efficiently expelled, contributing to a safer kitchen atmosphere.

Overall, the Kenmore 721.80049, 721.80042, 721.80043, and 721.80044 microwave ovens are designed to offer convenience, reliability, and versatility. With their modern features, user-friendly interfaces, and thoughtful safety mechanisms, these models cater to the needs of diverse households, making them an excellent addition to any kitchen.
Top Page Image Contents