Precision Power A500/2, A1000/2, A800/2 manual Amplifier Status Leds

Page 7

AMPLIFIER STATUS LEDS

1 2

The LEDs provide the following indications:

1.Power - These LEDs illuminates the center Precision Power logo background when the amplifier power is turned on.

2.Short - These LEDs behind the PPI logo will flash to indicate a short on the output.

2.Thermal - These LEDs behind the PPI logo will extinguish if the amplifier is in thermal shutdown protection.

Note: Read the AP-IV Protection Circuit section for additional information regarding Short and Thermal protection.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Amplifier Models Table of Contents Features ServiceCongratulations WHAT’S Included CEA SpecificationsGeneral Specifications SpecificationsLength Width Height Amplifier Status Leds Wiring TOOLS/PARTS for InstallationPage Ground Wiring PowerlocktmCurrent Draw Charging SystemPower Wire Size Powerlock Connectors 1211 Front Plate DiagramEND Plate Diagram Advanced Instrumentation Input InputsQbass Plustm Qbass Plus SpecificationsQbass PLUS/QBASS Remote TC-X Crossover A500/2, A800/2, A1000/2Crossover Detent Chart High Mass Internal Heatsink Adjusting Input GainAP-IV Protection Circuit Opposite Channel Same Channel Limited TWO Year Consumer Warranty
Top Page Image Contents