Kenmore 3384413A manual Troubleshooting, Dishwasher will not fill, Tips section

Page 16

TROUBLESHOOTING

Dishes are not completely clean

First t_j the solutions suggested here and possibly avoid

the cost of a service call...

Dishwasher is not operating properly

•Dishwasher does not run or stops during a cycle Is the door closed tightly and latched?

Is the right cycle selected? Refer to the "Cycle Selection Chart."

Is there power to the dishwasher? Has a household fuse blown or circuit breaker tripped?

Has the motor stopped due to an ovedoed? The motor automatically resets itself within a few minutes, If it does not restart, call for service.

Is the water shut-off valve (if installed) turned on?

•Dishwasher will not fill

Is the overfill protection float able to move up and down freely? Press down to release.

•Dishwasher seems to run too long

Is the water supplied to the dishwasher hot enough? The dishwasher runs longer while heating water, Refer to the =Dishwasher Efficiency Tips" section.

A delay automatically occurs in some wash and rinse cycles until the water reaches the proper temperature.

•Water remains in the dishwasher is the cycle complete?

•Detergent remains in the covered section of the dispenser

Is the cycle complete?

Is the detergent lump-free? Replace detergent if necessary,

Is the bottom rack installed properly with the bumpers in the front? Refer to the "Parts and Features" section, Reinstall the rack if necessary,

•White residue on the front of the access panel

Was too much detergent used? Refer to the "Detergent Dispenser" section.

Is the brand of detergent making excess foam? Try a different brand to reduce foaming and eliminate buildup,

•Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle once or twice a day until you have a full load.

Does the dishwasher have a new plastic smell? Run a vinegar rinse as described in "Spotting and filming on dishes" later in this Troubleshooting guide.

•Food soil left on the dishes

Is the dishwasher loaded correctly? Refer to the "Dishwasher Loading" section.

Is the water temperature too low? If needed, turn home water heater up to ensure water entering dishwasher is at least 120°F (490(3). Refer to the "Dishwasher Efficiency

Tips" section.

Did you use the correct amount of fresh detergent? Use recommended dishwasher detergents only. Refer to the "Detergent Dispenser" section. Never use less than 1 tb

(15 g) per load. Detergent must be fresh to be effective. Store detergent in a cool, dry area. Heavy soil and/or hard water generally require extra detergent.

Is detergent caked in dispenser? Use fresh detergent only. Do not allow detergent to sit for several hours in a wet dispenser. Clean dispenser when caked detergent is present.

Is the pump or spray arm clogged by labels from bottles and cans? If you wash bottles and cans in your dishwasher, check for labels clogging the pump or spray arm.

Is the home water pressure high enough for proper dishwasher filling? Home water pressure should be

20 to 120 psi (138 to 828 kPa) for proper dishwasher fill. A

booster pump on the water supply can be added if pressure is too low.

Are high suds slowing the wash arm? Never use soap or laundry detergents. Use recommended dishwasher detergents only.

Spots and stains on dishes

Spotting and filming on dishes

Is your water hard oris there a high mineral content in your water? CondLtioning the final rinse water with a liquid rinse

aid helps eliminate spotting and filming. Keep the rinse aid dispenser filled,

Is the water temperature too low? If needed, turn home water heater up to ensure water entering dishwasher is at least 120°F (49°C). Refer to the "Dishwasher Efficiency

Tips" section.

Did you use the correct amount of effective detergent? Use recommended dishwasher detergents only. Refer to the

"Detergent Dispenser" section. Never use less than 1 tb (15 g) per load. Detergent must be fresh to be effective, Store detergent in a cool, dry area, Heavy soil and/or hard water generally require extra detergent,

•Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the counter top? Moisture from the vent in the dishwasher console can form on the counter. Refer to the Installation Instructions for more information,

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Lave-vaisselle Ultra Wash Models/Modelos/Modles 665.15522, 665.15529, 665.16522Tableof Contents Above warranty coverage is effective for only 90 days WarrantyModel number Dishwasher Safety Important Safety InstructionsBefore Using Your Dishwasher Grounding InstructionsParts and Features Upper level wash Rack bumperSTART-UP Guide Ultra Wash Soil Removal SystemUsir 9 ¢our New , hwasher Food soil is disposed down the drain with the wash waterLo . diF gS 99es o s Dishwasher LoadingLoading the Top Rack Loading the Bottom ack TBaWhere to fill Dishwasher USEStarting a cycle Top of 1st tb or 15 gTo check water temperature Rinse Aid DispenserPress the desired cycle Turn the Cycle Control knob to Shows what steps are in each cycleUse this cycle For hard-to 24.2Option ections Addi g tems , rir 9 aTie Status !t dicator Drying System Can discolor or pit the finishCleaning Your Dishwasher Dishwasher CareContaining salt, acid, or sulfide eggs Mayonnaise, and seafood can damageDishwasher will not fill TroubleshootingTips section White spots on cookware with non-stick finish Brown stains on dishes and dishwasher interiorBlack or gray marks on dishes Orange stains on plastic dishes or dishwasher interior

3384413A specifications

The Kenmore 3384413A is a high-efficiency dryer heating element designed for various Kenmore dryer models. This vital component ensures optimal performance and efficient drying by generating heat to evaporate moisture from clothes and linens. With a focus on delivering consistent and reliable heating, the 3384413A is a favorite among homeowners seeking to maintain their laundry appliances.

One of the key features of the Kenmore 3384413A is its robust construction, designed to withstand high temperatures and extended usage. The heating element is made from durable materials that undergo rigorous testing to ensure longevity and reliability. This durability translates into lower maintenance costs, as users can expect a longer lifespan compared to lesser-quality alternatives.

Moreover, the Kenmore 3384413A utilizes advanced heating technology to deliver efficient heat generation. This element is engineered to quickly reach the required temperature, which not only enhances drying efficiency but also saves energy. Many modern dryers, including those that work with the 3384413A, are designed with eco-friendliness in mind, ensuring that consumers can effectively dry their clothes while minimizing their environmental footprint.

The compatibility of the Kenmore 3384413A with a range of dryer models is another significant attribute. It fits numerous Kenmore dryer variants, making it a versatile choice for users needing a replacement heating element. This adaptability ensures that homeowners are not limited to specific models, allowing for a broader application in various laundry setups.

Additionally, the installation process of the 3384413A is designed to be user-friendly. Detailed instructions typically come with the part, allowing even those with minimal technical skills to undertake a DIY replacement. This ease of installation is another reason why many opt for the Kenmore 3384413A when considering upgrades or repairs to their laundry appliances.

Beyond its practical features, the Kenmore 3384413A represents a commitment to quality and efficiency in household technology. It embodies the ideal blend of performance, durability, and user-friendliness, making it an essential component for anyone seeking to ensure optimal dryer function and energy-saving advantages in their daily laundry routines.
Top Page Image Contents