Installation, Safety instructions | Kenmore 9000416647(8811)

Installation

The dishwasher must be connected correctly, otherwise it will not function properly. The specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragraphs or in the installation instructions.

Install the appliance in the correct sequence:

Checking appliance on delivery

Installing the appliance

Waste-water connection

Fresh-water connection

Electrical connection

Safety instructions

Install and connect the appliance according to the installation and assembly instructions.

Prior to installation, disconnect the dishwasher from the power supply. Ensure that the protective conductor system of the domestic supply has been correctly installed.

The electrical connection conditions must correspond with the specifications on the dishwasher rating plate.

If the power cord of this appliance

is damaged, it must be replaced with a particular power cord.

To prevent injury, the power cord may be replaced by customer service only. If the dishwasher is installed in a high- sided unit, the unit must be secured properly.

Install built-under or integratable appliances only under continuous worktops which have been screwed to adjacent cupboards to ensure stability.

Do not install the appliance near heat sources (radiators, heat storage tanks, cookers or other appliances which generate heat) and do not install under a hob.

aus

After installing the appliance, ensure that the plug is easily accessible. Some models:

The plastic housing on the water connection contains an electric valve, the connecting cables are in the supply hose. Do not cut through this hose, do not immerse the plastic housing

in water.

Warning

If the appliance is not in a cavity and

a side panel is accessible, the door hinge area must be covered at the side for reasons of safety (risk of injury).

The covers are available as optional accessories from customer service or specialist outlets.

Delivery

Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash cycle.

Installation

The required installation dimensions can be found in the installation instructions. Level the appliance with the aid of the height-adjustable feet. Ensure that the appliance is situated securely on the floor.

A built-under or integrated appliance which is installed subsequently as a free-standing appliance must be secured to prevent it from overturning, e.g. by screwing it to the wall or by installing it under a continuous worktop which is screwed to adjacent cupboards.