I÷J
OPBMTiON
OvenCon ol, Clock, and Timer(cont.)
If the display flashes an "F" followed by a number and beeps continuously, you have a function errorcode.
Note the number after the "F." Turn the oven controlknob to the OFF position. Disconnect all power to the range for at least 30 seconds and
retry the oven operation. If the "F" displays during a
the latch is moved to the right as
far as it will go. Turn the OVEN CONTROL KNOB to the OFF
position. Allow the oven to cool 1 hour and retry the oven operation. If the problem repeats, call for service, Advise the technician what the
flashing code was.
÷
When the power to your range is turned on for the firsttime, or if you experience a power failure, the display will flash "PF." By touching the CLOCK pad, the display will flash "12:00."Touch the CLOCK pad again and follow the instructionsto set the
clock.Any operation set beforea
power failure will need to be reset.
The oven will automatically shut off if it has been left on for more than 12 hours.
To deactivateor reactivatethe automaticshutoff,touchand hold the
MIN UP and DOWN arrowpads for÷ about 4 seconds,
11