Kenmore 10653594300, 10653392300, 10653394300 Allow 24 hours to produce the first batch of ice

Page 14

To increase ice production rate:

Normal Ice Production: In normal ice production mode, the ice maker should produce approximately 7 to 9 batches of ice in a 24-hour period. If ice is not being made fast enough, turn the Freezer Control toward a higher (colder) number in half number steps. (For example, if the control is at 3, move it to between 3 and 4.) Wait 24 hours between each increase.

Maximum Ice Production (on some models): In maximum ice production, the ice maker should produce approximately 10 to 14 batches of ice in a 24-hour period. If your refrigerator has the maximum ice production feature, push the switch to MAX.

To remove and replace freezer shelf ice bin (Style 1):

1.Pull the covering panel out from the bottom and then slide it back toward the rear.

2.Lift the wire shutoff arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made.

3.Lift up the front of the storage bin and pull it out.

4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shutoff arm down to the ON

position to restart ice production. Make sure the door is closed tightly.

To turn the ice maker on/off (Style 2):

The ON/OFF switch is located on the top right side of the freezer compartment.

1o To turn the ice maker on, slide the control to the ON (left) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

2.To manually turn the ice maker off, slide the control to the OFF (right) position.

To remove and replace freezer door ice bucket (Style 2):

1o Place four fingers in bucket base opening and rest thumb on the release button.

2.Holding the base of the bucket with both hands, depress the release button and lift the bucket up and out. It is not necessary to turn the ice maker control to the OFF (right) position. The ice maker will not produce ice without the bucket in the door.

To care for ice storage bin or bucket:

1o Empty the ice container. Use warm water to melt the ice if necessary.

NOTE: Never use anything sharp to break up the ice in the bin or bucket. This can cause damage to the ice container and the dispenser mechanism.

2.Wash ice bin or bucket with a mild detergent, rinse well and

dry thoroughly. Do not use harsh or abrasive cleaners or solvents.

REMEMBER:

Allow 24 hours to produce the first batch of ice,

Discard the first three batches of ice produced to avoid impurities that may be flushed out of the system.

The quality of your ice will be only as good as the quality of the water supplied to your ice maker.

Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

It is normal for the ice cubes to be attached at the corners. They will break apart easily.

For Style 1 ice maker, do not force the wire shutoff arm up or down.

Do not store anything on top of or in the ice maker or ice bin or bucket.

14

Image 14
Contents Side by Side Refrigerator 2260872Table of Contents Warranty Refrigerator Safety Before you throw away your old refrigerator or freezerCleaning before use Installation InstructionsWhen Moving Your Refrigerator 1tiRecommended grounding method Base Grille Door Alignment Bottom Hinge Top Right HingeHandle Removal optional Style Disconnect wiring plugDoor and Hinge Replacement Door RemovalCold water supply Reconnect wiring plugConnecting to Water Line Connecting to Refrigerator ¢o, P22Refrigerator USE Rotary Controls on some modelsAdjusting Rotary Controls Ice dispenserTo dispense water To dispense iceWater dispenser Dispenser lightChanging a base grille water filter cartridge Non-indicator water filter on some modelsUsing the dispenser without the water filter Style 1 Behind the base grille filterTo remove and replace freezer shelf ice bin Style Allow 24 hours to produce the first batch of iceTo increase ice production rate To remove and replace freezer door ice bucket StyleRefrigerator Features Crisper or Vegetable/Meat Drawer CoversHumidity Control is located on the crisper drawer Be o she/ve vaeswth o leTo remove and replace the bins Cleaning your refrigeratorTo remove and replace the freezer basket or bin Snap-on Door Rails To remove and replace the railsLower Freezer Light Beneath Ice Bin on some models Dispenser Light on some modelsUpper Freezer Light on some models If you choose to turn the refrigerator off before you leave MovingMotor seems to run too much 1ROUBLESHOOTINGThere is water in the defrost drain pan Ice maker is not producing ice or not enough iceWater dispenser will not operate properly Divider between the two compartments is warmIf Annual Preventive Maintenance Check at your request no Master Protection AgreementsWater Filter Certifications Maintenance AgreementsSears Maintenance Agreement Base grille water filter cartridges Cyst CartridgeProduct Data Sheets Application Guidelines/Water Supply ParametersYour Home

10653094300, 10653082300, 10653532300, 10653594300, 10653084300 specifications

The Kenmore 10653392300, 10653394300, and 10653384300 refrigerators have become popular choices for households in need of durable and effective cooling solutions. Each model represents a perfect blend of sophisticated design, advanced technology, and user-friendly features.

One of the standout features of these Kenmore refrigerators is their spacious capacity. With ample room for groceries and household items, they offer multiple shelves, bins, and compartments, allowing for optimal organization. The adjustable shelving accommodates larger items, making the refrigerator versatile for different storage needs.

Another significant aspect is the cooling technology used in these models. The Kenmore refrigerators utilize a high-efficiency cooling system that helps maintain a consistent temperature throughout the unit. This feature not only preserves food freshness but also minimizes energy consumption, leading to potential savings on electricity bills. The advanced refrigeration system is designed to operate quietly, ensuring a peaceful home environment.

In terms of user convenience, these refrigerators come equipped with built-in water and ice dispensers. The access to filtered water and ice at the touch of a button adds a level of luxury and practicality that many users appreciate. Additionally, some models feature adjustable temperature controls, allowing users to customize the cooling settings based on the food being stored.

The design of the Kenmore refrigerators is both stylish and functional. Available in various finishes, including stainless steel, these units easily blend into modern kitchens. The exterior is often designed to be smudge-proof, making it easier to maintain a clean appearance.

Furthermore, the 2260872 model is known for its energy-efficient design, which helps reduce the environmental footprint having been certified through energy ratings. This commitment to sustainability is increasingly significant for consumers looking for eco-friendly appliances.

Overall, the Kenmore 10653392300, 10653394300, 10653384300, and 10653084300 models are exemplary choices for those in search of reliable refrigeration solutions. Their combination of spacious interiors, advanced cooling technologies, user-friendly features, and attractive design make them valuable assets in any kitchen. With these refrigerators, Kenmore continues to uphold its reputation for quality and innovation in home appliances.