REFRIGERATOR
FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please call the
section.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small,
Your model may have glass or wire shelves. Store similar foods together and adjust the shelves to fit different heights. This reduces the time the refrigerator door is open and saves energy.
To remove and replace a shelf in a metal frame:
1.Pull the shelf forward to the stop. Tilt the front of the shelf up and lift it slightly as you pull the shelf from the frame.
2.Replace the shelf by guiding it back into the slots on the frame and pushing the shelf in past the stop.
Shelves and Shelf Frames
To remove and replace a shelf/frame:
1.Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.
2.Replace the shelf/frame by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position.
The dell drawer stores raisins, nuts, spreads, and other small items at normal refrigerator temperatures.
To remove and replace the dell drawer:
f.Remove the dell drawer by sliding it straight out to the stop. Lift the front and slide the drawer out the rest of the way.
2.Replace the dell drawer by sliding it back past the stop.
Crisper and Convertible Vegetable Meat Drawers
To remove and replace drawers:
1.Slide crisper or meat drawer straight out to the stop. Lift the
front of drawer with one hand while supporting the bottom of drawer with the other hand and slide the drawer out the rest
of the way.
2.Replace the crisper or meat drawer by sliding it back in fully past the drawer stop.
Crisper or Vegetable/Meat Drawer Covers
To remove and replace covers:
1o Remove the crisper and meat drawer. Press up in center of crisper glass insert until it rises above the plastic frame.
Holding the crisper glass firmly, carefully slide the glass insert forward to remove.
2.Lift crisper cover frame and remove. Repeat steps to remove the meat drawer cover.
3.Replace back of meat drawer cover frame into supports or slides on side walls of the refrigerator and lower or slide the front of the cover frame into place.
4.Slide rear of glass insert into cover frame and lower front into place. Repeat steps to replace the crisper cover.
15