Kenmore 795.7871, 795.7872 manual Removing Humidity Controlled Crisper, Glidenserve, Controls

HUMIDITY CONTROLLED CRISPER

The crispers provide fresher-tasting fruit and vegetables by letting you easily control humidity inside the drawer. The crispers include:

A crisper drawer humidity control switch.

You can control the amount of humidity in

the moisture-sealed crispers. Adjust the control

to any setting between _				and
•	_	keeps	moist air in the crisper		for best storage
	of	fresh, leafy	vegetables.
•	_	lets moist air out of the crisper			for best storage of

fruits.

REMOVING HUMIDITY CONTROLLED CRISPER

1.To remove, pull the drawer out to full extension.

2.Lift the front of the crisper up, then pull it straight out.

3.To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.

To remove the glass

1.Lift up the glass under the crisper cover.

2.Pull the glass up and out.

GLIDE'N'SERVE

The Glide'N'Serve provides storage space with a variable temperature control that keeps the compartment colder than refrigerator temperature.

This drawer can be used for large party trays, dell items, or beverages.

Temp control

COLD • ® • /	///	// • • • COLDER
/	w	//

Controls

The control regulates the air temperature in the drawer. Set control level to COLD to provide normal refrigerator temperature. Use the COLDER setting for meats or other dell items.

NOTE: Cold air directed to the Glide'N'Servecan decrease refrigerator temperature. Refrigerator control may need to be adjusted.

To replace Glide'N'Serve

1.To remove, pull the drawer out to full extension.

2.Lift the front of the drawer up, then pull it straight out.

3.To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.

24