To change freezer light
NOTE: Some models have LED interior lighting and service should be performed by a qualified technician.
1.Unplug refrigerator power cord form outlet.
2.Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove the rear tabs.
3.Make sure the bulb is cool to the touch. Turn the bulb counterclockwise to remove.
4.Replace with a new
5.Insert tabs on back of cover into slots in freezer ceiling. Push cover up to snap front into place.
I
WHEN YOU GO ON VACATION
if you choose to leave the refrigerator on while you are away, follow these steps to prepare your refrigerator before you leave.
1.Use up any perishables and freeze other items.
2.Empty the ice bin.
if you choose to turn the refrigerator off before you leave, follow these steps.
1.Remove all food from the refrigerator.
2.Depending on your model, set the thermostat control (refrigerator control) to OFF. See the Setting the Controls section.
3.Clean refrigerator, wipe it and dry well.
4.Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.
_. CAUTION: DO NOT place fingers inside of cover. Lamp may be hot.
•When you are finished, reconnect the refrigerator to the electrical source and reset the controls. (Thermostat, Refrigerator Control, and or Freezer Control, depending on the model) to the desired setting.
POWER iNTERRUPTiONS
1.If the power will be out for 24 hours or less, keep all refrigerator doors closed to help foods stay cold and frozen.
2.If the power will be out for more than 24 hours:
a)Remove all frozen food and store it in a frozen food locker.
WHEN YOU MOVE
When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.
1.Remove all food from the refrigerator and pack all frozen food in dry ice.
2.Depending on your model, turn the thermostat control (refrigerator control) to OFF. See the Setting the Controls section.
3.Unplug the refrigerator.
4.Clean, wipe and dry thoroughly.
5.Take out all removable parts, wrap them well and tape them together so they don'tshift and rattle during the move. Refer to sections in Using your Refrigerator for removable instructions.
6.Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the leveling legs all the way so they don'tscrape the floor. See the Door Closing section.
7.Tape the doors shut and tape the power cord to the refrigerator cabinet.
When you get to your new home, put everything back and refer to the installing Your Refrigerator section for preparation instructions.
29