The operation of any lawn SAFETVG'ASSESmower can result in foreign

objects thrown into the eyes, which can result in severe

eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_k,CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the

risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

. Self-propelling is controlled by holding the operator presence control bar down to the handle and pulling either drive control lever rearward to the handle. The further toward the handle a lever is pulled, the faster the unit will travel.

. Forward motion will stop when either the operator presence control bar or a drive control lever are released. To stop forward motion without stopping engine, release a drive control lever only. Hold operator presence control bar down against handle to continue mowing without self-propelling.

handle to lift the front wheels off the ground while turning lawn mower.

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become "loose", resulting in decreased speed. There is a turnbuckle on the drive

control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate turnbuckle on drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

ustment

turnbuckle

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

• To change cutting height, pull up on adjuster lever, move wheel up or down to suit your requirements and release adjuster lever. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when lever inserts into hole in plate.

LEVER BACKWARD

TO LOWER MOWER

NOTE: If after releasing the drive control the mower will not roll backwards, push

LEVER FORWARD

Lever

the mower forward slightly to disengage drive wheels.

Operator presence control bar

Drive control levers

TO ENGAGE DRIVE CONTROL

DRIVE CONTROL DISENGAGED

TO RAISE MOWER

Plate

• To keep drive control engaged

when

8

turning corners, push down on

the

Page 7 Page 9
Page 8
Image 8
Craftsman 917.376542 owner manual HOW to USE Your Lawn Mower
Page 7 Page 9

917.376542 specifications

The Craftsman 917.376542 is a riding lawn mower that embodies performance and durability, making it a reliable choice for homeowners with medium to large lawns. Known for its robust build and user-friendly features, this model offers both efficiency and comfort, appealing to gardening enthusiasts and casual users alike.

One of the standout features of the Craftsman 917.376542 is its powerful engine. Equipped with a 19.5 horsepower Briggs & Stratton engine, this riding mower delivers ample power for tackling tough terrains and thick grasses. Its vertical, air-cooled design ensures reliable start-up and smooth operation, setting the stage for an efficient mowing experience.

The mower features a 42-inch cutting deck, which is ideal for maneuvering around garden beds, trees, and other obstacles. This cutting deck is designed for precision and can be easily adjusted to multiple cutting heights, ranging from 1.5 to 4 inches. This versatility allows users to customize their lawn's appearance based on seasonal conditions and personal preferences.

In terms of user comfort, the Craftsman 917.376542 is equipped with a high-back seat that offers excellent support during long mowing sessions. The ergonomic steering wheel enhances handleability, while the foot-controlled hydrostatic transmission provides seamless speed adjustments without the need for shifting gears. This technology contributes to a smoother ride and simplifies operation, especially for those who may be less experienced with handling riding mowers.

Another significant characteristic of this lawn mower is its ease of maintenance. The mower's design allows for straightforward access to essential parts, facilitating routine upkeep tasks such as oil changes or air filter replacements. Additionally, the mower features an easy-to-clean cutting deck, helping to maintain optimal performance over time.

For those seeking versatility in yard care, the Craftsman 917.376542 can accommodate a wide range of attachments, including baggers, snow blades, and mulching kits. This adaptability enables users to transition their mower into a multi-functional tool, extending its usability beyond the mowing season.

In summary, the Craftsman 917.376542 stands out with its powerful engine, maneuverable design, comfortable operation, and maintainability. These features align to make it an excellent investment for homeowners seeking an efficient and dependable riding lawn mower.
Top Page Image Contents