Kenmore 795.5103 manual Adjusting Control Settings, CONDITION/REASONRECOMMENDED Adjustment

Page 18

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely before making final adjustments. It is best to wait 24 hours before doing this. The initial settings mentioned in CONTROL PANEL FEATURES section should be correct for normal household refrigerator use.

The refrigerator control functions as the thermostat for the entire appliance (refrigerator and freezer sections). The colder the setting, the longer the compressor will run to keep the temperature colder. The freezer control adjusts the cold air flow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the freezer compartment to make it colder.

If you need to adjust temperatures in the refrigerator or freezer, start by adjusting the refrigerator and allow 24 hours for the temperature to stabilize. If it is too warm or

ICEIVlAKER OPERATION

Personal Injury Hazard

Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

A newly-installedrefrigerator may take

12 to 24 hours to begin making ice.

too cold, then adjust the freezer control.

Use the settings listed in the chart below as a guide. Always remember to wait at least 24 hours between adjustments.

CONDITION/REASON:RECOMMENDED ADJUSTMENT :

m REFRIGERATOR section too Set the Refrigerator

warm

control

one

degree

- Door opened often.

colder;

wait

24 hours

- Large amount of food added. for the new setting to

Indicator Light

Ice Cube size

\

Shutoff Arm

Power Switch

- Room temperature very warm. take full effect before

 

making another

 

adjustment.

m FREEZER section too

Set the Freezer control

warm/ice not made fast enough one

degree colder;

- Door opened often.

wait

24 hours for the

-Large amount of food added. new setting to take full -Very cold [below 55°F (13°C)] effect before making

room temperature.

 

 

another

adjustment.

 

 

 

 

(Compressor does

not cycle

 

 

often enough).

 

 

 

 

- Heavy

ice usage.

 

 

Move items out of

-Air vents blocked by items.

 

 

 

 

airstream

m REFRIGERATOR

section

too

Set the Refrigerator

cold

 

 

 

control

one degree

-Controls

not set correctly

for

warmer;

wait 24 hours

your conditions.

 

 

for the new setting to

 

 

 

 

take full effect before

 

 

 

 

making another

 

 

 

 

adjustment.

m FREEZER section too cold

Set the Freezer control

-Controls

not set correctly

for

one degree warmer;

your conditions.

 

 

wait 24 hours for the

 

 

 

 

new setting to take full

 

 

 

 

effect before making

 

 

 

 

another

adjustment.

selector button

The icemaker will produce 6 cuber per cycle, approximately 100 cubes in a 24 hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions.

If the refrigerator is used before the water connections is made to the icemaker, set the power switch to OFF (O).

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the shutoff arm, the icemaker will stop producing ice.

When the bin fills to the level of the shutoff arm, the icemaker will stop producing ice.

It is normal for several cubes to be stuck together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale, and shrink.

18

Image 18
Contents Kenmoreo Englsh / Espaiol/FranaisProtection InstallationInstallation instructions InstructionsSIDE=BY-SIDE Refrigerator Master Protection Agreements Instructions To Connect Electricity USE of Extension CordsRecommended Grounding Method Installation Base Grille InstallationUnpacking Your Refrigerator Leveling the Refrigerator Door Handle RemovalElectricShockHazard Removing and Replacing Refrigerator DoorsReinstallingtheright refrigeratordoor Door Alignment After Leveling the Door HeightConnecting the Water Line Before YOU Begin Power drillWhat YOU will Need = Drill the Hole for the Valve Shut OFF the Main Water Supply= Choose the Valve Location Fasten the Shutoff ValvePlug in the Refrigerator = Flush OUT the TubingConnect the Tubing to the Refrigerator Start the ICEiVIAKERWater Filter @ Refrigerator Shelf @ Snack Pan Prior to USE Control Panel FeaturesEnsuring Proper AiR CiRCULATiON Refrigerator and Freezer ControlsUltra ICE Door AlarmFilter Reset Control LockAdjusting Control Settings CONDITION/REASONRECOMMENDED AdjustmentFood Storage Guide Storing Frozen FoodWater and ICE Dispenser ICE Storage BIN Crisper and Crisper CoverDoor Rack and Support Refrigerator Shelves SnackpanFreezer Shelf Water Filter Filter Performance Data Sheet EcautionPower Interruptions General Cleaning TipsLight LED Replacement Door Liners and GasketsWhen YOU should SET the Icemaker Power Switch to OFF O When YOU GO on VacationWhen YOU Move Normal Sounds YOU MAY HearNoise Understanding Sounds YOU MAY HearVibration Lights do not WorkDoors will not Close Completely Compressor Motor Seems to RUN TOOMuch Cubes Produced by Icemaker are TOO SmallDoors are DiFFiCULT to Open There iS Water iN the Defrost Drain PAN Frost or ICE Crystals on Frozen FoodICE has BAD Taste or Odor Refrigerator Seems to Make TOO Much NoiseNot Dispensing iCE Not Dispensing WaterManagemylife