REPLACING THE CARBON FILTER
CARTRIDGE (cont.)
To replace the cartridge, follow steps I - 6 on page 3. Be sure to clean the inside of the sump. Cleaners are available from Sears (see the parts list on page 7), or use hot, soapy wa-
ter. After replacing the cartridge, flush the cartridge for 2 - 3 minutes to remove harmless carbon fines (see note on page 5).
SERVICE CHECK LIST
Filtered water has bad - The carbon cartridge needs replacing. taste and/or odor.
Fine, black particles in - This is harmless carbon "fines" from a new
filtered water,cartridge. Discard the first few cupfuls of fil- tered water after changing the cartridge.
No water flow from the - Cold water faucet and/or diverter valve not
_ter.opened.
-Supply tubing, from diverter valve to filter, pinched or plugged.
-The carbon cartridge needs replacing.
6