Planning | Your | installation |
| ............................................................................... |
|
| 3 | |||||
Tools | and | Materials | Needed |
| .............................................................................. |
| 3 | |||||
Typical | Undersink | installation | ............................................................................ |
| 4 | |||||||
installation | Steps |
|
|
|
|
| ||||||
| Step | 1 | - install Cold Water Supply Fitting | 5 | ||||||||
| Step | 2 | - Make Hole for | Filtered | Water | Faucet | 6 | |||||
| Step | 3 | - Assemble | and |
| install | Filtered | Water Faucet | 6 | |||
| Step | 4 | - Make | Tubing | Connections | 7 | ||||||
Filter | Cartridge | installation | / | Replacement | 8 | |||||||
Using | the | System |
|
|
|
|
| 9 | ||||
Filter | Cartridge | Life |
|
|
|
| 9 | |||||
Exploded |
| View | & Parts | List |
| .......................................................................... |
| |||||
When planning your installation, use the drawings on pages 4 & 5 to guide you. There are many things to consider as you plan:
V The water filter housing inlet and outlet connections are 1/4" Quick Connect
Y Existing plumbing type (copper, threaded, etc.) and nominal size (1/4", 3/8", etc.)
Y Tools required (see below)
V Your plumbing skills
Y Cost of materials needed
Y Space available for installing the filter housing
Y The possibility of water spilling from sump when replacing filter cartridges
Make a simple sketch of your proposed installation, and a list of plumbing materials you will need. Obtain every-
thing you need before starting the installation. Be sure you have the tools required.
Y | Plumbers' | Putty |
| Y | Tubing | Cutter |
|
| ||
Y | Slotted | and | Phillips | Screwdrivers | Y | Sandpaper | or | Emery | Cloth | |
Y | Pliers | and | Adjustable | Jaw Wrench | Y | Electric | Drill | & 3/4" | Drill Bit, if mounting hole is | |
|
|
|
|
|
| needed | for | the faucet |
| |
Questions? Call The Kenmore Water Line